Former Member | 22/02/2020 08:06:40 |
1329 forum posts | [This posting has been removed] |
roy entwistle | 22/02/2020 08:46:37 |
1716 forum posts | Bill Whats wrong with clocks ? Roy |
Former Member | 22/02/2020 08:49:45 |
1329 forum posts | [This posting has been removed] |
Journeyman | 22/02/2020 08:49:49 |
![]() 1257 forum posts 264 photos | TV "reality" shows, totally and utterly pointless. Mind you I do watch Pointless John |
Clive Hartland | 22/02/2020 09:04:02 |
![]() 2929 forum posts 41 photos | Being housebound for a while I get to watch a lot of TV, soon it is apparent that TV is a repeat service and I ended up watching documentaries and of all things, Tipping point. Innate TV programmes do not inspire me. Particularly reality shows, Love island for example, I fear that generation has gone to the dogs. |
not done it yet | 22/02/2020 09:20:45 |
7517 forum posts 20 photos | Supposed short cuts that don’t work - likely most of them! If one is going to do a job, it might just as well be done properly. |
Douglas Johnston | 22/02/2020 09:31:49 |
![]() 814 forum posts 36 photos | People with a fixed mindset who can't see the other side of an argument. Doug |
Michael Gilligan | 22/02/2020 10:03:48 |
![]() 23121 forum posts 1360 photos | Posted by Bill Chugg on 22/02/2020 08:49:45: […] but would be good to hear what does not inspre you like stationary engine or traction engine etc. . O.K. ... I will come clean [and admit to a deficiency in my schooling] Steam engines became much less fascinating when the Atmospheric principle was abandoned, and they worked on positive pressure. I distinctly remember thinking [in school Physics class] ...is that all there is to it ? MichaelG. |
JasonB | 22/02/2020 10:07:13 |
![]() 25215 forum posts 3105 photos 1 articles | Although I don't find the sight of a Loco or clock inspiring enough to go out and make one some of the workmanship involved in both can certainly be inspiring, maybe we need a third thread for those of us stuck between the two? |
mechman48 | 22/02/2020 10:48:05 |
![]() 2947 forum posts 468 photos | Posted by Journeyman on 22/02/2020 08:49:49:
TV "reality" shows, totally and utterly pointless. Mind you I do watch Pointless John +1... Inc 'Pointless' the most appropriately named show I've ever seen. Reality TV.... sad programmes for sad people with sad lives; looking for their 15 minutes of fame. George. |
Ady1 | 22/02/2020 10:50:46 |
![]() 6137 forum posts 893 photos | re: the telly being rubbish I took out a virgin mobile deal to watch telly type stuff on utube etc, I'm a big fan of old documentaries as well as anything else thats interesting current deals go up to 120gb for 23 bananas a month With a decent tablet you can view stuff anywhere anytime Charging is an issue with gadgets but they have magnetic plug adaptors nowadays, these simply fit in to the port and clip on and off, there are lots to choose from at various prices Edited By Ady1 on 22/02/2020 10:58:21 |
Mick B1 | 22/02/2020 10:59:40 |
2444 forum posts 139 photos | Posted by JasonB on 22/02/2020 10:07:13:
Although I don't find the sight of a Loco or clock inspiring enough to go out and make one some of the workmanship involved in both can certainly be inspiring, maybe we need a third thread for those of us stuck between the two? Oh, I suspect that'd catch many of us - those who dared reply...
|
roy entwistle | 22/02/2020 11:00:42 |
1716 forum posts | Bill I'm inspired by almost anything mechanical and old. I marvel at what some clock makers and especially watchmakers made when you consider what tools they had. I would include gunsmiths too Roy |
Alan Jackson | 22/02/2020 11:02:00 |
![]() 276 forum posts 149 photos | I do not like the reason for doing things in a slap dash manner, excuses like " Quick and dirty" etc. If its worth doing do it well. Alan |
Nick Wheeler | 22/02/2020 11:22:13 |
1227 forum posts 101 photos | I don't like spending hours 'perfecting' a tool for a one-off job that will take 30 seconds.....
My 'quick and dirty' hub extractor, which was welded together on the car out of four pieces of scrap, not only did both of my wheel bearings(normally about £200 per side) but has made a profit on several jobs that I've done for other people. I did knock off the sharp edges with an angle grinder before I used it for the second time..... |
bill ellis | 22/02/2020 11:51:54 |
71 forum posts 2 photos | Most TV is pretty awful these days. One thing I cannot get my head around is why total fwits go on quiz shows. Maybe it is because they are too stupid to know they are stupid. Even my dog knows the name of the wide collars worn by men in Elizabethan times (Ruff). |
Mick B1 | 22/02/2020 12:21:21 |
2444 forum posts 139 photos | Posted by bill ellis on 22/02/2020 11:51:54:
Most TV is pretty awful these days. One thing I cannot get my head around is why total fwits go on quiz shows. Maybe it is because they are too stupid to know they are stupid. Even my dog knows the name of the wide collars worn by men in Elizabethan times (Ruff). Oh yeah? Well my cat knows the name of the first Chairman of the Glorious Chinese People's Revolutionary Party... Edited By Mick B1 on 22/02/2020 12:21:33 |
Circlip | 22/02/2020 12:46:07 |
1723 forum posts | The inability of idiots unable to post photos with the correct orientation. Naffed off having to replug the PSU in my laptop due to having to turn it sideways and the free advertising of cell phones.
Regards Ian.
Sent from my Lenovo laptop using fingers to type on a qwerty keyboard. |
Mike Poole | 22/02/2020 13:38:25 |
![]() 3676 forum posts 82 photos | Posted by bill ellis on 22/02/2020 11:51:54:
Most TV is pretty awful these days. One thing I cannot get my head around is why total fwits go on quiz shows. Maybe it is because they are too stupid to know they are stupid. Even my dog knows the name of the wide collars worn by men in Elizabethan times (Ruff). Dunning–Kruger effect Mike |
Journeyman | 22/02/2020 13:41:49 |
![]() 1257 forum posts 264 photos | Whilst perhaps not inspired by your average Smith's wall clock this on the other hand is certainly an inspiration. Astronomical Skeleton Clock by Buchanan If I had just a fraction of the skill required to build this I would be well pleased (and I got the photo up the right way). John |
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
Sign up to our newsletter and get a free digital issue.
You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.