Bill Dawes | 08/03/2018 22:59:53 |
605 forum posts | Now I have seen it all (well until the next time) Bought a greetings card the other day, one of the film wrapped ones, and there was a sticker inside telling me to remove wrapping before sending. Who and why thought this was a necessary thing to say? Bill D. |
Bazyle | 08/03/2018 23:12:00 |
![]() 6956 forum posts 229 photos | how many warnings did it have to dispose of the wrapping carefully, not eat it, that it is flammable, to keep away from children, to recycle it............ |
Mike Poole | 08/03/2018 23:19:29 |
![]() 3676 forum posts 82 photos | McDonald's advise us that coffee is hot, I think I knew that before I could read. Mike |
IanT | 08/03/2018 23:26:00 |
2147 forum posts 222 photos | Yes! |
fizzy | 08/03/2018 23:39:55 |
![]() 1860 forum posts 121 photos | Indeed
|
Trevor Drabble | 08/03/2018 23:42:44 |
![]() 339 forum posts 7 photos | Another example of the "sue" culture ? Remember the American who successfully sued a motorhome manufacturer , who , as he was driving down the road , set the vehicle to automatic and then went into the back to make a drink and was then less than happy when the vehicle subsequently left the road and crashed ? |
Mexican jon | 09/03/2018 02:53:53 |
34 forum posts 5 photos | The world gone crazy
Edited By Mexican jon on 09/03/2018 02:54:33 |
Martin Dowing | 09/03/2018 04:29:30 |
![]() 356 forum posts 8 photos | This is called "progress". In any case our schools are good for nothing and cause brain damage of kids. Martin |
"Bill Hancox" | 09/03/2018 04:41:53 |
![]() 257 forum posts 77 photos | I chuckle at the label on Huggies diapers (nappies). The package states "up to 10 lbs". The average person would surmise that they are referring to the weight of the baby. There are probably some village idiots who would think that the diaper holds 10 lbs of poop. |
I.M. OUTAHERE | 09/03/2018 05:39:15 |
1468 forum posts 3 photos | Posted by Bill Dawes on 08/03/2018 22:59:53:
Now I have seen it all (well until the next time) Bought a greetings card the other day, one of the film wrapped ones, and there was a sticker inside telling me to remove wrapping before sending. Who and why thought this was a necessary thing to say? Bill D. Surprised it didn't have the instructions on how to open it on the inside ! |
jimmy b | 09/03/2018 06:00:10 |
![]() 857 forum posts 45 photos | Posted by Mick Charity on 09/03/2018 05:07:09:
Posted by Trevor Drabble on 08/03/2018 23:42:44:
Another example of the "sue" culture ? Remember the American who successfully sued a motorhome manufacturer , who , as he was driving down the road , set the vehicle to automatic and then went into the back to make a drink and was then less than happy when the vehicle subsequently left the road and crashed ? I guess the real test of stupidity comes from those who believe this to be true. Whilst it is more common to crash a motorhome on cruise control than it should be, there are precious few real, documented cases of where anyone has successfully 'sued' the manufacturer. Well said!
Jim |
FMES | 09/03/2018 06:24:06 |
608 forum posts 2 photos | If you are into bizarre humour, watch a film called 'Idiocracy' - it will explain all in the first few minutes of the film. Regards Lofty |
not done it yet | 09/03/2018 06:58:18 |
7517 forum posts 20 photos | Posted by IanT on 08/03/2018 23:26:00:
Yes! Clearly a reply to the thread tittle? In that case,+1. I used to ride (perched!) at the side/back of a Standard Fordson while ploughing. My job was to trip the plough out of, and in to, work at the headlands each end of the field. I was about 7 and my brother was about 9. He steered the tractor and operated the clutch pedal. Dad, I think, kept the furrow reasonably staight with our other tractor - by adjusting the inside furrow width, as necessay, of his plough. This would have been after school and while the farm worker went off to milk the cows. . My other duty, while plowing, was to replace the engine governor rod, when it fell off and the engine revved at full speed. The rod was very adjacent to the fan blades, but I knew I needed to keep my hands away from the spinning fan. Can’t remember actually being trained about the risks involved - only how to do it. We knew to oil the mowing machine cutter bar while standing behind the oscillating knife; we knew to keep away from the (unguarded) flywheel of the hay baler; etc,etc. I was driving a large tractor, on my own, by the age of about 7 or 8. I dared not stall it as I could not restart it (engine started with a handle). If I needed to stop the engine, I parked it on a steep slope and did a rolling start, if necessary. I was steering a D8 Caterpillar with Euclid scraper at the age of 12, and cutting at 13. My elder brother used to drive to the cut and back, unsupervised, while the regular driver had a rest/snack. The only bit he was not allowed to do unsupervised, was to empty the box at the tip - a steep down-hill run while operating the emptying cable mechanism. Times have certainly changed! |
jimmy b | 09/03/2018 07:05:48 |
![]() 857 forum posts 45 photos | Posted by not done it yet on 09/03/2018 06:58:18:
Posted by IanT on 08/03/2018 23:26:00:
Yes! Clearly a reply to the thread tittle? In that case,+1. I used to ride (perched!) at the side/back of a Standard Fordson while ploughing. My job was to trip the plough out of, and in to, work at the headlands each end of the field. I was about 7 and my brother was about 9. He steered the tractor and operated the clutch pedal. Dad, I think, kept the furrow reasonably staight with our other tractor - by adjusting the inside furrow width, as necessay, of his plough. This would have been after school and while the farm worker went off to milk the cows. . My other duty, while plowing, was to replace the engine governor rod, when it fell off and the engine revved at full speed. The rod was very adjacent to the fan blades, but I knew I needed to keep my hands away from the spinning fan. Can’t remember actually being trained about the risks involved - only how to do it. We knew to oil the mowing machine cutter bar while standing behind the oscillating knife; we knew to keep away from the (unguarded) flywheel of the hay baler; etc,etc. I was driving a large tractor, on my own, by the age of about 7 or 8. I dared not stall it as I could not restart it (engine started with a handle). If I needed to stop the engine, I parked it on a steep slope and did a rolling start, if necessary. I was steering a D8 Caterpillar with Euclid scraper at the age of 12, and cutting at 13. My elder brother used to drive to the cut and back, unsupervised, while the regular driver had a rest/snack. The only bit he was not allowed to do unsupervised, was to empty the box at the tip - a steep down-hill run while operating the emptying cable mechanism. Times have certainly changed! Clearly all very good examples of why we need so much safety now. I take it you'd let grand kids play with a mower.....
Jim |
Clive Hartland | 09/03/2018 08:15:05 |
![]() 2929 forum posts 41 photos | Yes, even adults have accidents! As a 10 or 11 year old I was loading fruit boxes onto a lorry for transit to market, tying down the load, then ride to the drivers house to tell him it was ready to go. Feed and curry the Dray horses and water them. Stand with the Farrier as he made horse shoes and helping by holding the piercing punch for the nails. I enjoyed my child hood, tramping the mud in the Medway and coming back on a plank as the tide rose, hand dabbing for flatties in the creeks etc.getting the first cherries and apples without being caught. Edited By Clive Hartland on 09/03/2018 08:21:40 |
Neil Wyatt | 09/03/2018 08:24:54 |
![]() 19226 forum posts 749 photos 86 articles | NDIY may have survived but the rate of deaths and injuries to children on farms is and has always been appalling. The HSE produced a booklet for farmers which started: "Using real examples, this booklet highlights the main causes of the 44 child deaths in agriculture from 1990-2000." Back in the 1980s I recall that farming was the most dangerous industry, ahead of steelmaking and coalmining. It doesn't change. "6 Feb 2017 - Farming. 1. Farming. Reuters / Phil Noble. Agriculture is the UK's most dangerous industry, with 167 deaths over the past year. " "30 Oct 2013 - Agriculture is still one of the most dangerous areas to work, according to the latest figures released by the Health and Safety Executive. "
Neil
|
Sam Longley 1 | 09/03/2018 08:28:10 |
965 forum posts 34 photos | When I was 9 my father bought me a Bridges DIY kit which included a small wood turning lathe, a pillar drill & a circular saw as ax Xmas present. I quickly wore it out so the following year he bought me a Myford wood turning lathe. I cannot imagine my daughter in law even allowing my grandson to go anywhere near such equipment let alone go in a shed on his own & use them totally unsupervised & make things. I have just submitted an article for a magazine about how at the age of 12 I took my fathers boat & sailed off with a friend for a bank holiday. Nothing particularly startling but certainly unusual in today's world. Today's generation will just grow up having missed so much of life's experiences & will, in the end, be so much the worse for it. Those bought up in the eastern part of the world are doing those things & will run rings around our younger generation in years to come Edited By Sam Longley 1 on 09/03/2018 08:30:34 |
Jon Gibbs | 09/03/2018 09:00:52 |
750 forum posts | I'm not sure that I agree entirely that society as a whole is getting more stupid - rather, I think that society has become more aware of its responsibility for the well-being and actions of the stupid or the ill-informed. In days gone by if a few stupid people were injured/killed due to their ignorance it was just fine and dandy - strengthened the gene pool, allegedly. These days, I'm not so sure. There is another case of course and that is when the stupid and ill-informed are responsible for the safety of others - their own children's or other people's safety... **LINK**. It probably goes way too far at times but what can you do?... The fact is that the wealth of knowledge is expanding all of the time and we're all stupid and ill-informed about a large proportion of that. Socrates claimed to know nothing and it's fair to say that we, as a society, know a heck of a lot more now than in his day. But, I'd argue that very few of us are humble enough to know or acknowledge our own limits like Socrates - You only have to think about the recent "fashion" for mistrusting experts, who by definition know more about their subjects than the general populace... ...I think that brings us back to the OP's question, but hopefully it is just a short term blip and we don't need to start building the 'B' Ark of the Golgafrinchans Jon |
Mick B1 | 09/03/2018 09:06:01 |
2444 forum posts 139 photos | I think Neil's got the point there. This thread's a bit self-selecting. Some of us know we may've been more fortunate than clever. The ones who didn't get away undamaged from their youthful exploits won't generally be posting here. |
pgk pgk | 09/03/2018 09:16:32 |
2661 forum posts 294 photos | Posted by Mick B1 on 09/03/2018 09:06:01:
I think Neil's got the point there. This thread's a bit self-selecting. Some of us know we may've been more fortunate than clever. The ones who didn't get away undamaged from their youthful exploits won't generally be posting here. I think that's called natural selection and evolution. We all used to swim in the local river every summer and I only recall one kid tangled in weeds and drowning pgk |
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
Sign up to our newsletter and get a free digital issue.
You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.