Report what you have been upto here (engineering related)
Sam Longley 1 | 06/11/2017 07:33:02 |
965 forum posts 34 photos | Posted by Andrew Johnston on 05/11/2017 19:51:57:
Posted by Roderick Jenkins on 05/11/2017 18:41:18
I was there in Engineering Physics, July to December '75 on a thin sandwich course Oeeeer, we overlapped for a couple of months. I started in September 1975, on a thick sandwich course. I was based in the Student Engineer Training Centre by Queen's Gate and next to the IAM. Same corner as the RAE Hostel where we lived; built some time around WW1 and not updated since! Still had 3A and 5A round pin plugs in the rooms. Andrew What is the betting that in a minute these 2 are going to find that they had a long lost daughter together that they never knew about |
Roderick Jenkins | 06/11/2017 09:50:19 |
![]() 2376 forum posts 800 photos | Posted by Sam Longley 1 on 06/11/2017 07:33:02:
What is the betting that in a minute these 2 are going to find that they had a long lost daughter together that they never knew about
Rod |
Sam Longley 1 | 06/11/2017 11:34:59 |
965 forum posts 34 photos | Posted by Roderick Jenkins on 06/11/2017 09:50:19:
Posted by Sam Longley 1 on 06/11/2017 07:33:02:
What is the betting that in a minute these 2 are going to find that they had a long lost daughter together that they never knew about
Rod Yes I suppose so- one would be careful about a bloke who goes around looking at the pin holes in UK plug sockets . I wonder how many do that sort of thing!!!. Dare not Google it,--- in case I get a visit from the "authorities" ( he says as he ducks below parapet) |
Roderick Jenkins | 06/11/2017 12:30:37 |
![]() 2376 forum posts 800 photos | We clearly had similar experiences. Student accommodation with only 3 amp round pin sockets to stop you making toast in your room. Old ministry buildings that didn't waste the taxpayers money by changing the old round pin 5 and 15 amp sockets to 13 amp square pin. Of course, after we were contractorised and had private industry management that all changed - the whole building was re-wired and then knocked down a year later. Such is progress - costs were the same but with an added 10% for the management company. Rod |
John Gardener | 06/11/2017 12:32:10 |
![]() 75 forum posts 21 photos | Posted by Sam Longley 1 on 06/11/2017 11:34:59:
Posted by Roderick Jenkins on 06/11/2017 09:50:19:
Posted by Sam Longley 1 on 06/11/2017 07:33:02:
What is the betting that in a minute these 2 are going to find that they had a long lost daughter together that they never knew about
Rod Yes I suppose so- one would be careful about a bloke who goes around looking at the pin holes in UK plug sockets . I wonder how many do that sort of thing!!!. Dare not Google it,--- in case I get a visit from the "authorities" ( he says as he ducks below parapet)
If you want to chance a 'visit' tryse nding amess ageli kethi sinfi velett ergro psoka
|
Gordon W | 06/11/2017 15:22:10 |
2011 forum posts | I worked at dehaviland (spelling) at Hatfield years ago. Walked past a water tank with a short section of Comet fuselage in it every day. I never thought to ask what is was for. If it was used for pressure testing the body ends must have been plugged somehow. This was a few years after the stress problems were discovered. |
Samsaranda | 06/11/2017 17:48:57 |
![]() 1688 forum posts 16 photos | Remember moving by road one of the Comet pressure test fuselages in the early sixties, can't remember where from, I think it ended up at RAF Abingdon. The remains of the water tank used for pressure testing the Comets at Farnborough were still in place when I was there a few years ago, obviously left as some sort of memorial to our brief lead in world jet passenger liner domination, if only the British aviation industry had the money that the Amreicans had then perhaps we would still be leading the aviation world. Dave |
larry Phelan | 08/11/2017 18:38:31 |
![]() 544 forum posts 17 photos | Not a lot !! |
David Standing 1 | 08/11/2017 19:26:55 |
1297 forum posts 50 photos | Posted by larry Phelan on 08/11/2017 18:38:31:
Not a lot !!
Nor me. Spent four hours today composing an email to my solicitor on the subject of my nightmare divorce, originally commenced over two years ago |
Steve Pavey | 08/11/2017 20:16:37 |
369 forum posts 41 photos | I cleared some tools from my late dad’s workshop some time ago. He had a toolmakers chest packed with drills and taps, various hand tools and some specials obviously made for a particular job (he worked at Vickers during the war in a department headed by Barnes Wallis). So today I’ve been making a display cabinet from teak, with a baize backboard on which I will wire some of the more interesting items - hopefully ready in time to give it to my mother for Christmas. He became a teacher in around 1950 - head of the engineering and woodwork department at a grammar school, which I went to as well and was taught by him. Although I hated having my father at the same school as me, he was fortunately well-liked by all the pupils. I can remember him using some of the tools, especially his Moore and Wright micrometer which was always in the pocket of his white coat, ready to check our work. His workshop door had his nameplate on it - he must have prised it off on the day he retired, as I found it in the chest - and will be included on the display board. I’ll take a photo or two when it’s done. Edited By Steve Pavey on 08/11/2017 20:17:36 |
mechman48 | 08/11/2017 21:06:46 |
![]() 2947 forum posts 468 photos | Lost internet connection this morning, virgin media's fault, again, 'oh dear' was my comment, or words to that effect |
Oldiron | 08/11/2017 21:27:24 |
1193 forum posts 59 photos | Posted by Roderick Jenkins on 06/11/2017 12:30:37:
Old ministry buildings that didn't waste the taxpayers money by changing the old round pin 5 and 15 amp sockets to 13 amp square pin. . Rod I could swear that the pins on a 13 plug & socket are rectangular.
|
Cornish Jack | 08/11/2017 23:41:55 |
1228 forum posts 172 photos | Re. the Comet's square windows etc., my first operational tour was on Valettas with (as on the similar Varsity) square windows. No pressurisatrion on either, of course, although I did one trip across the North Sea in the Varsity) where we 'topped out' at 25,000'. Never any window problems on either type but the Valetta (as with the Vikings) suffered from main spar cracking and (in one case) a wing fold rgds Bill |
Robin | 09/11/2017 05:42:43 |
![]() 678 forum posts | OMG you are all so old, I remember round pin sockets but not everyone was lucky enough to have one. I was born and raised in 1950's Oxford. There were a lot of students in bedsits. It was amazing how many of those Bakelite Y adapters they could daisy chain in to one light socket without the ceiling catching fire |
Muzzer | 09/11/2017 08:12:01 |
![]() 2904 forum posts 448 photos | You can still buy 1A and 5A round pin plugs and sockets. |
V8Eng | 09/11/2017 08:43:10 |
1826 forum posts 1 photos | I was browsing the new MK Cat and noticed the 5 & 15A ones in there.
Edited By V8Eng on 09/11/2017 08:43:36 |
Tony Jeffree | 09/11/2017 09:49:05 |
![]() 569 forum posts 20 photos | Posted by Steve Pavey on 08/11/2017 20:16:37:
I cleared some tools from my late dad’s workshop some time ago. He had a toolmakers chest packed with drills and taps, various hand tools and some specials obviously made for a particular job (he worked at Vickers during the war in a department headed by Barnes Wallis). Edited By Steve Pavey on 08/11/2017 20:17:36 Hi Steve
That is interesting - one of my late uncles worked at Vickers, also in Barnes Wallis's department, during the war. He almost certainly worked with your dad. He talked about being stationed with the Dam Buster squadron as a technician during the raids and having to de-fuse one of the bombs that failed to release over the target and returned to base still in the Lancaster - he was the only person on the station at the time that knew how to de-fuse it. Scary stuff. Regards, Tony |
Andy Carruthers | 09/11/2017 15:00:29 |
![]() 317 forum posts 23 photos | Today I mostly bought this... |
Tim Stevens | 09/11/2017 15:34:03 |
![]() 1779 forum posts 1 photos | Steve Pavey says, of his engineer dad: His workshop door had his nameplate on it - he must have prised it off on the day he retired ... I bet he didn't. He used the screwdriver he made as an apprentice to unscrew the four slotted screws, and he put the screws in a Colmans Mustard tin at the end of the top shelf and next to his reserve tin of engineers blue. Just in case they might come in useful. Cheers, Tim |
Robin | 09/11/2017 16:01:03 |
![]() 678 forum posts | Posted by Andy Carruthers on 09/11/2017 15:00:29:
Today I mostly bought this... Glorious. Do you have a use for it or was there simply no good reason not to buy it? |
This thread is closed.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
Sign up to our newsletter and get a free digital issue.
You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.