Westyman | 17/10/2011 17:56:21 |
9 forum posts | I have just joined this forum and I cannot see an "introduce yourself" heading as many forums seem to do. Either there isn't one or I have missed seeing it in the headings.
|
NJH | 17/10/2011 18:27:29 |
![]() 2314 forum posts 139 photos | Hi As far as I know there isn't one - good idea though. You could give your details in your profile which will then appear when anyone clicks on your name in a post - but most folks don't have one. Just just jump in and add your comments! Regards Norman Edited By NJH on 17/10/2011 18:30:27 |
Gray62 | 17/10/2011 18:34:41 |
1058 forum posts 16 photos | Nope, there isn't one, but then again, this isn't a normal forum! I'm not entirely sure what software is being used to provide the forum but it doesn't seem to follow the normal format for this type of environment.
But then again, many of the 'features' of this site are unusual, the digital magazines are another area which many of us have a 'bone of contention' over.
I'm sure, over time these things will be resolved although they should never exist in the first place
![]() |
Westyman | 17/10/2011 18:39:37 |
9 forum posts | Posted by CoalBurner on 17/10/2011 18:34:41:
this isn't a normal forum!
![]() Well that's a comfort!!
|
Stub Mandrel | 17/10/2011 21:00:01 |
![]() 4318 forum posts 291 photos 1 articles | Welcome Westyman! Neil |
Nobby | 17/10/2011 23:08:41 |
![]() 587 forum posts 113 photos | Hi Westyman Welcome What interests you ? Machines , models , Have you got a current project? Nobby |
Martin Cottrell | 17/10/2011 23:35:38 |
297 forum posts 18 photos | Welcome Westyman! Following Coalburner's revelation that this "isn't a normal forum!", I feel you should be forewarned that there is a minimum PPE requirement of a hard hat and bullet proof vest if you intend engaging in opinionated discussions on certain topics. The velocity at which toys are jettisoned from prams is surprising and has been known to cause denting of pride, loss of self-importance and even total sense of humour failure!
I should point out that I comment merely as an observer, feeling far too thick to have an opinion worth expressing when it comes to engineery type discussions. It's surprising what you can learn though just sitting on the fence enjoying the fireworks!
Regards, Martin. |
Springbok | 18/10/2011 05:12:51 |
![]() 879 forum posts 34 photos | Hi Kerry
Now you have purchased your lath how about makeing a sterling engine or something of that ilk instead of just carving up bits of metal. quote from your profile thats where we introduce ourselves. lets know and we will all help you but with your qualifications you should have no problems.
let us know how you get on.
Bob
Oh Springbok is a Thompson class B1 of which amoungst other projects is a 5" guage train that I am building.
|
KWIL | 18/10/2011 11:21:14 |
3681 forum posts 70 photos | You could always add some details under "My Profile" !! |
Ian S C | 18/10/2011 11:27:23 |
![]() 7468 forum posts 230 photos | I agree with Martin, but I think some people's compuror chair s were made by Martin Baker, a bit upset, and BANG.
And Bob when I got my lathe I started off by making tap wrenches, and die holders. Then as I was still into wood turning I made a dozen each of driving centers for wood lathes in no., 1 and no., 2 morse taper, some plain morse taper centers, and a dozen live (rolling) centers. By then I'd been found by some vintage tractor types, and I started making parts for Lanze tractors, then Willys Jeeps.
Just put a little bit in your profile, it gives us some little idea of who you are, and what you know / don't know. Ian S C |
Springbok | 18/10/2011 16:52:25 |
![]() 879 forum posts 34 photos | Hi
You must be near an old mate of mine Don Bradshaw we done the last cruise of the QE2 together round the world he is helping to restore a full size passenger ship unusual as there is props front and aft.
Yes I am remiss and will put some gen in my profile thought I had done it.
Westyman do not worry there bark is worse than there bite, and please keep asking questions, I am constantly.
Regards
Bob |
Westyman | 18/10/2011 17:05:15 |
9 forum posts | Thanks for all the comments; I have put some stuff in my profile as suggested.
Some nice light-hearted comments made me chuckle. I know some forums can become rather agressive, there are a couple that I have simply not bothered with after a while, they seem populated by folks who think Eastenders is real life.....
Current projects are a model railway in the loft which is a bit of a haul from the workshop in the garage LOL Oh and the garden needs some work too; the house has been neglected since retirement.....always lots to do.
We are away this week on our shared narrowboat, that has a prop at the back and at the front too, just a little one in a transverse tube.....damn windy too today.
|
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
Sign up to our newsletter and get a free digital issue.
You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.