TEST THREAD

It take a while before first posts can be approved by a moderator.

It's our main line of defence against con artists.

Neil

The only bit of this forum I don't like is that you can only edit for a short while. So if a day later I see I have errored I can not go back & correct it, as I can with most of the other forums I am on. 5 in total.

When the forum was set up it was in the days when people changing their posts to make others look foolish was a concern. These days things move on too fast for this to be a worry, but similarly past errors slip down the list just as fast!

Neil

[This posting has been removed]

Just A test!!!!! I'm not very computery and wanted to try and post a picture.    It Worked !

Edited By Dave Wootton on 01/05/2020 06:29:38

I'm new here. I just signed up so I could ask you blokes a question regarding specific BSW threads

I'm just posting to see if it works

New here, need to post a couple of times

Hi, I'm a new member, not used forums before, so just finding my feet.

Hi Rob welcome to the forum but please post on the new members thread to get the best from here.

David

Hi all,

New member so here`s my first test post, very wise advice I always think!

If in danger or in doubt,

Always keep a sharp lookout.

Test Post experimenting to see if a moderator can format source code, which should be indented and in a fixed width font, not as formatted by the forum editor.

Example from Michael Gilligan, corrected by me:

#define THRESHOLD 10
#define PUSH_TIME 30
#define A_PIN A0

void setup() {
    pinMode(A_PIN,INPUT);
    analogReference(INTERNAL);
}

void loop() {
    if(analogRead(A_PIN)>THRESHOLD) {
       pinMode(A_PIN,OUTPUT);
       digitalWrite(A_PIN,HIGH);
       delay(PUSH_TIME);
       pinMode(A_PIN,INPUT);
    }
    delay(1);
}

Comment: Font can be changed suitably with an HTML <code> ... <\code> block

Unfortunately tab characters and multiple spaces don't survive when computer source is  pasted. (because tabs were removed in HTML3)  I can put in &nbsp characters manually but correcting indentation this way is a right pain. 

<span style> doesn't seem to work - need to swot up on HTML - probably doing it wrong!

Edited By SillyOldDuffer on 15/09/2020 18:46:49

Dave, when you edit a post it is possible to look at the source, top left of editor, useful when someone posts text by copy and pasting and brings over formatting that may for example push the text into the right hand adverts.

Thanks Jason, exploring that now. Seems possible but hard work!

Cheers,

Dave

Hi. JasonB Paste does not work for me. Copy works ok but have to use ctr V to paste copied text.

Is this usual ?

Am using latest version of Edge and get message browser not supported.

regards

Same with Firefox. It's a security improvement designed to stop hackers embedding the equivalent of copy, cut and paste commands in web-pages that copy what you have displayed on screen back to Evil HQ. The browser blocks mouse clicks because they can be simulated in software, and insists on the user typing CTRL-V because only a human being can do that.

Bit of a nuisance on most websites but it stops private data being nicked whilst online banking etc.

Dave

Thanks for the reply Dave. Makes sense now.

regards

.

My five minutes of fame ... and I didn’t even notice

MichaelG.

I am trying to see if I can make this link to an online video work. Online video link

.

Assuming that it’s the Steam Boat ... it works for me

MichaelG.

Also possible to click the "share" tab on the video and pick up the embed code then you can click on the Youtube icon at the top of the reply box and paste the embed code in the box that comes up. I prefer this way as people can see what they are about to click on and decide to watch or not.

Edited By JasonB on 12/10/2020 14:37:33