Screwdrivers

Can anyone suggest a uk supplier for small flat bladed screwdrivers for clock repair. Looked on ebay , most looked like they where out of a christmas cracker.

I was thinking of a small set , no philips , something that would do the job.

Cheers Mike

I've bought a couple of sets of Vessel brand ( Japanese) small screwdrivers flat bladed and the special cross head ones used on Japanese cameras, not too expensive but fit well and after a good few years use still ok.

Dave

I see Amazon do them.

Just thought for clocks the set Vessel Veus11 flat bladed set might be more suitable than the miniature sets, pleased with mine, suppose it depends on the size of the clock!

Edited By Dave Wootton on 07/12/2022 17:26:29

Edited By Dave Wootton on 07/12/2022 17:40:23

The Eclipse jewellers screwdriver set in a blue plastic wallet are pretty good, and are only reassuringly expensive.

I use the Wera Kraftform Micro :- Wera

Available from Amazon and others in the UK.

Cousins Material House set of 9 AF screwdrivers. Replaceable blades, MUCH cheaper than Bergeon. I have had mine for sixteen years and have mended everything from Timexes to Rolexes and good watches as well.

Thanks guys, just the job.

Mike

A little on the expensive side try some of these

OP did stipulate Clock repair

I like Wera tools but I am biased as I spent a week in Germany at their factory learning about the Profilator machines they made that machined the blades.

Nice tools

Martin P

Plus 2 for Wera also Wurth are very good quality

But they are both German made so you would expect that

This thread got me looking into small screwdrivers (again) as I could do with some, especially X head, as the last set I bought was at a Radio Ham Rally back in the 80's! They are an unbranded Chinese make and have been really good over the years however they are getting a bit tired now.

From experience Wera has been ok so I did a search and came up with this set "Wera 118150 6 Piece Kraftform Micro Precision Screwdriver Set" on ebay for £19.95 from a tool specialist in Somerset. Seems good value as it has postage included.

I really like wooden handled narex https://www.workshopheaven.com/tools/screwdrivers/narex-screwdrivers/

I heard Kyoto Tools are better...