Hi from Nelsons County

Hi All: I am a retired Engineer with more time to spend on various engineering projects. I stared out as a Mechanical Tech Apprentice and Production Engineer for a major electronics company. I then joined the petro chemical industry as a designer finishing up working in various roles on offshore support contracts.

I have a double garage with access to a Clarke Lathe with O/H mill attachment. floor mounted pillar drill, metal chop saw, Fabricator MIG and stick welder, plasma cutter, compressor and range of engineering hand tools. For woodwork I have a table saw and planer thicknesser plus all the normal hand tools. A lot of these have been collected new and second hand over time from various sources.

I always have several projects on the go and more waiting. Currently I am having a bit of a clear out and rationalisation as I will never get around to finishing them or using the stuff I have horded over the years. One of the reasons for joining the forum is to find out more about some of the bits and pieces I have accumulated before either finding a home for them or just weighing them in for scrap.

First up will be the Denham lathe that has been sat around for at least ten years since I acquired it. I will post more on this on the Machinery section.

Welcome to the nuthouse Andrew

Welcome to the forum, Andrew.

Neil

Hi Andrew and welcome, there are quite a few of us amateur swarf generators and horders of ' will come in useful one-day stuff' spread around these parts, so probably someone is tucked away quite near to you, and as there's very little in the way of industrial supply here, you'll probably not have too much trouble in off loading your junk, sorry, useful stuff!

Trevor

Hi Andrew, What part of Norfolk are you? I am near Hemsby. Regards Pat

Andrew, Pat - me too! ... an import, of course. Bacton Green (that's the other bit of Bacton-on-Sea) Lots of kit but little activity

rgds

Bill

I am at the opposite side of the county in Kings Lynn.

Emgee

I spent my childhood in Lynn. Highgate infants and St James's primary. Lived in Gaywood and Reffley. Have missed it ever since...

Edited By Mark Rand on 02/12/2018 21:15:34

So am I, looks like we should start a group of our own.

Phil

Mark, I moved into a house in Burnham Ave during 1967, opposite Spring Close. Was there for around 25 years, small world !!!

Emgee

Hi from NE Thailand!

Small world!

Grew up in Norfolk, lived in Bacton as a kid, lived in North Walsham, Tunstead, and finally Norwich.

Had a motorcycle engineering and metal finishing business in Hoveton, Wroxham for 15 years.

Emigrated 15 years ago.

My wife is the other Norwich city football supporter, so have to live in the city

Have not visited, but having seen their stand at Shows, There is a thriving M E Club in Kings Lynn.

If you are nearer to Wisbech, the Peterborough Society of Model Engineers, may be another alternative, if you are prepared to travel a way to either club.

Howard

Howard, The ME Club in KL has been there for many years, I am not a member but I believe it is mainly loco orientated people, perhaps there may be a member lurking on here somewhere ?

Emgee