Any car waxes etc that help keep cars clean?
Neil Wyatt | 13/08/2016 17:32:08 |
![]() 19226 forum posts 749 photos 86 articles | Posted by Ajohnw on 13/08/2016 16:17:02:
Posted by Neil Wyatt on 13/08/2016 14:50:03:
Posted by Old Elan on 13/08/2016 10:43:58:
Pressure washers and cars, bikes and cycles do not mix well in my estimation! Agreed, I'll never forgive the one that took the lacquer off the passenger door of my Honda Integra! Neil Some people expect the pressure to get the dirt off so get close - maybe you did Neil. Ok for concrete but can take the surface off, can actually remove the surface of timbre and not a good idea at all on cars. They need the right sort of brush attachment really.
- John - This was at a garage jetwash, they shouldn't be powerful enough to strip lacquer however close you get.
|
Ajohnw | 13/08/2016 19:31:16 |
3631 forum posts 160 photos |
Fixed the horrid to wind in extension lead. Screwfix 20m for £14.99. DIY rated but except for size seems no different to the trade rated ones. The whole thing looks to be smaller. The reel is a bit full but should be ok. Not available for delivery so they might be selling stock off. I found a video of the shampoo thingy being used. Might try a wash and wax product. The Clark sucked the shampoo liquid up far too quickly. This one may not. John - |
Vic | 13/08/2016 19:36:36 |
3453 forum posts 23 photos | A neighbor suggested I should borrow her little jet washer to get the grime off our patio. It did do the job eventually but her little 100 bar Karcher made it take longer than hoped. I went out and bought a 140 bar Nilfisk PW and that made things much quicker. Not sure I'd want to use it on the car though in case it blows anything off. |
Dave Halford | 13/08/2016 20:30:07 |
2536 forum posts 24 photos | my neighbour has a black Toyota with some lovely pressure washer marks. I really wouldn't
Mind you my old man never washed his van and the paint went matt so you pays your money etc |
Ajohnw | 13/08/2016 20:36:51 |
3631 forum posts 160 photos | That sort of power usually has something on it to adjust it. Vic. I tried the garage type diy pressure washer a couple of times but wasn't impressed. I suspect Neil tried to blast away the dirt. I don't think that some rubbing can be avoided. That's why I bought the brush. It puts out a wide fan when that is on and it looks like most of the water goes on the brush. The local jet wash people do a lot of cars. They don't run the nozzle close to the car at any time other than wheels and tyres. I'd say something like 3ft away. They jet wash to remove the loose stuff. Use a pump up spray to put shampoo on. Go over the car then with hands and pads, they do a lot of it so use both hands. Then jet wash the shampoo off. Open the doors and wiper round the sills etc. They also use a wheel cleaner via a pump up spray. They will also leather the car for extra money but I usually drive a few miles. What ever it is they use it doesn't seem to leave streaks or spots. The shampoo they use seem to be some sort of wash and maybe a light wax but they will wax for a fee as well.
John - Edited By Ajohnw on 13/08/2016 20:38:09 |
Ray Lyons | 14/08/2016 08:03:05 |
200 forum posts 1 photos | A lot of the older cars with solid blue and red paint suffer from fading, not something easily cured. I recently bought a Silverline 1800 washer, mainly to clean the paved areas around the house but I would not use it for car washing. I have a cheap low power job for that. My procedure for washing the car is to wet it all over with a spray from the garden hose and then using a large soft brush and a bucket of diluted traffic film remover, go all over the car. For the wheels, I use a mild degreaser. this is then followed by a jet wash. I could then use a wax/wash in the jetter but it is difficult to control so this is applied with the brush, then a final spray with the garden hose. Finally drying off with a leather. The whole process takes about an hour but that is a lot safer than having to pay out for a respray. I also know a chap who does the same thing for £4 and only takes about 5 minutes so when in a hurry I go there knowing he does a good job but you have to chose with care, paint casts a lot these days. |
Bazyle | 14/08/2016 08:48:20 |
![]() 6956 forum posts 229 photos | I got a fairly new car at xmas and the carpets were like new. No I won't be washing it any time soon but I took out the drivers carpet and gave it a bash against a tree and although the dry mud comes out as dust the bits of dry grass seem to stick in the nap. Any suggestions? How did they do it in the showroom or were they actually a new set? I think patio washing should be illegal as a waste of water. Have you never picked up a plant pot and noticed the clean ring under it. Just have one spare slab and move it around every few days. Another option is to let some grass etc grow over it for a few years then scrape it off. |
Clive Hartland | 14/08/2016 08:58:32 |
![]() 2929 forum posts 41 photos | Buy some foam cleaner for the carpet Bazyle, it is a dry foam. Re the power washers, my Karcher came with two wands,one for high pressure and the other was a low pressure one that had an oscillating ball with a hole in it for car washing. They indicate not to use the high pressure one on cars as it can permanently damage paintwork and lift emblems off the body. The high power jet does the patio stones lovely and clean but they soon discolour again. One thought, if you store it over winter outside with water in it it will freeze and damage the pump casing, next door did that and had to buy a new one so make sure it's drained before storage. Clive |
Ajohnw | 14/08/2016 11:02:40 |
3631 forum posts 160 photos | I hired a wet and dry vacuum to tidy up the inside of a Shogun some years ago. The place I hired it from warned me about carpet shampoos and cleaner and said I should really use one intended for car interiors. I had a cyclist run into the side of the X-type, bike and head. He was wearing those popular close fitting sun glasses that restrict peripheral vision and didn't see me straight in front of him. Feeling kind I took it to a small body repair shop that I have used before. Cost £220. Unlike the insurance owned repairers he doesn't just replace the panel and spray that leaving a mismatched panel colour. He blends it in which often involves spraying the entire side of the car and other parts very carefully. He just pulled the dents out. I don't think that is expensive really. I didn't have to pay anyway. I'm a bit bemused concerning comments about the pressure and car paint work. To me it seems to be pretty obvious that the quoted pressure is in the nozzle and the the pressure of the jet that comes out is less than that 'cause the area is bigger and gets less and less as the nozzle is moved further away because the area gets larger and larger. Having used them before I don't think that they will get a car perfectly clean all on their own. They might with the nozzle a few inches away. Some rubbing is needed hence buying a brush with it that is intended for car cleaning. I've used it and the car looks a lot better but if I look closely it's covered in water spots so I will try a shampoo next. That should allow it to dry more evenly. If the pressure washer pumps it out too quickly I'll stick it on with a garden spray. Either way I will rub it in with the brush with the pressure washer off maybe with some squirts just using the water mains pressure. Then brush it off with the pressure washer on and then jet wash it. Later I might try a wash wax but suspect that will need leathering. Personally I only use a traffic film remover now and again but they are probably dead safe anyway. People probably get a dose of it when ever they pay for any sort of car wash. John - |
wheeltapper | 14/08/2016 18:18:58 |
![]() 424 forum posts 98 photos | I wash mine when I can't see out of the windows.
Roy. |
pgk pgk | 14/08/2016 19:04:28 |
2661 forum posts 294 photos | <<....the bits of dry grass seem to stick in the nap...>> Domestic vacuum cleaner with a brush head then Duct Tape to remove those short white Dalmatian hairs that stick into any fabric..... |
Bazyle | 14/08/2016 19:25:46 |
![]() 6956 forum posts 229 photos | Posted by pgk pgk on 14/08/2016 19:04:28:
<<....the bits of dry grass seem to stick in the nap...>> Domestic vacuum cleaner with a brush head then Duct Tape to remove those short white Dalmatian hairs that stick into any fabric..... That seems a good idea, thanks. now, can I be bothered? There were two big 'presents' from passing horses between me and the car this morning. Normally like to leave them a day or two before collecting for the compost heap but then some idiot goes and drives through them leaving a trial all over the road. So now have to be extra careful as it isn't going to rain for a few days. |
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
Sign up to our newsletter and get a free digital issue.
You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.