Member postings for bernard towers

I still have stocks of Dormer/Esicut etc from 30+ years ago and am glad of it having heard of some of the offerings now available

Jason, I have been using mine dry for about 4years and there is no build up on the tip at all. for hobby use it seems that it has a very long life.

Sounds like it has some sort of unloader valve.

FPerhaps you had better read my post again,just saying what size pcd I use

Edited By bernard towers on 03/09/2023 20:25:24

Edited By bernard towers on 03/09/2023 20:25:51

Surely if the penetration is good and regular the finish follows?

I use ccmt 0602 size on ally/brass and bronze, the finish on ally has to be seen. They work on materials without a ferric content.

Interesting to know that I am not the only one who looks at HMSC's site it has some interesting stuff.

problem is what's relevant to one may not be to the other!

I personally use a Newnes in the workshop as it’s much smaller and has most commonly needed info.

Look in All ads 4th to 7th june

In agreement with OM can't see the point of using headroom especially if you do not have much!

look at the ads Matt

That was a good find!

Wouldn’t mind betting that the saddle gibs need adjusting if you are marking the material on the way back.

Surely the wiring only goes to the terminal box?

My Bike banjos are fitted with dowry washers and are ok but having said that the fluid is fully synthetic.

looks like the arc ones are ok as they are 4k7 just choose with or without switch.

I should imagine it's seized in its socket ,the idea is that rocks to the correct place when the second belt is fitted. By the look of the machine mod no it is a 16 speed machine which is why the centre jockey pulley needs to float to accommodate several belt arrangements.

went to a bell foundry in Italy that does founding for the Vatican and they still dig holes in the floor and line with clay and animal hair. Same set up for centuries.

sorry Andrew but if you have Hemingway tool with diamond knurls why don't you buy a straight set from Hem and then you would have a tool able to do both patterns. I bought both sets when I made mine and as they are Industrial quality will do a fantastic job for a very long time in a home workshop environment possibly saving money in the long run(buy cheap buy twice)!!!