Member postings for Brian Morehen

Thanks Michael G Forgot to add Threads to the E mail addres

Thank Bee M

Have a look at ,.www.gerardsgarage.com web site this thread is in therethread list .

Good Luck

Bee M

Hi Bill,

Flat Irons Finishing irons Tailors Irons PoolTable Irom Some Thay require a metal slug And a Dali last in excess of 20 , All used to be on display in Our Dry Cleaning Shop till we sold it Know in the garage..

Regards Brian M

Had a job for it has not been used for 30 yrs . Switched on ran for about 3 MIns

then burnt out , any one need any parts before before it goes to the tip

PM me for any info.

Wolf NW5  5/8 chuck capacity electric drill

Brian Morehen

Edited By Brian Morehen on 06/04/2020 16:28:20

Spring washers useually go on the armature after the bearing between the end of the bearing and the motor end plates one each end to stop end float

Good luck

Brian .M

Motor plug 4 leads Top of Pic Earth 2 Lead Neatral 3 lead Live 4 Lead incomeing live takeing feed by the black lead to foot pedal and back to motor at No 3 single red live to .

Brian M

Most electric shavers used to have inferance supressors fitted sounds like these have decided not to work

Years since i last took one to pieces to repair dont even know if these are still fitted most shavers are now rechargable .

Brian M

yes it is different .Can get in takes longer have no idea what they have done

Brian M

Most Air compressors Have a air Filter fitted because they need to breath ,A Sealed unit fridge compressor does not breath . I wonder if you continue pumping out air you will eventually create a vacunm in the unit witch will force it to stop , If when running it seems to be strugerling switch of because the motor is getting overloaded

.Good Luck

Brian M

Any Electrcal store will be able to advise you on a suitable replacement , If in the UK no problem New Zealand I dont now what is available?

Good Luck Brian M

The motor name plate and details will teel us all a lot , This looks like a 5hp or more size motor. Are you running this through a 3ph Inverter .The motor sound chages when running I wonder if this is running on 2 phases because the inverter has brocken down and lost a phase .

Brian M

Is this a single phase motor or a 3 Phase one that has been altered..

Brian

Your push to stop buttons I hope they all have a reset control otherwise once you release when operated the machine will restart , This is not what you require as a Emergancy stop or push to stop is just that Machined stopped. . Supply to Machine Starter control relay coil has been broken , Machine will not start untill the problem or reason has been been corrected.

I solved this problem on my saw bench by fitting 2 way switching on each side of the bench.

Your question on earthing asumeing the complete machine is metal everything will bond through the metalwork.

Brian Morehen

Well remeber the 2Ft Grinder that my Dad had used to run this in a wet bath and crank this wile dad sharpen whatever he neded to sharpen Seem to remember being told place 2 hexagon nuts side by side when your drill fits into the V slot this looks good and will cut OK

Brian Morehen

Metercut CF Found this on EBay a few years ago , The best I have found to date forThread Cutting Hacksawing and thing else you need to cut

Bian Morehen

Try Gunk engine Degreaser , Brush it on and let it soak it then rub it off with a dry then finish with a damp cloth or hose of and dry will look like new

Brian Morehen

This was my first question when i was shown how to solder flared ends onto copper tude for presure gauges on refrigeration test gauges . Why is this called silver solder when the colour is brass in colour Neverb did get a answer?

Brian Morehen

Oven Cleaner I have used this all of my vans to remove the sign writeing aand never damaged the paintwork on the motor. May be worth a try the sign work was paint and had been done by a singwriter.

Brian Morehen

Available from Thursday 13 Feb At Lidl Bench Pillar Drill £ 59.99 Looks good Info sounds O/K May have look if there . No I am not selling it . Any body in need may be worth a Look?

Brian Morehen

Try a 6mill screw very close,.Found this as a mistake Had one in my allen screw assortment screwed in to my BSF thread only to find my AF Allen Key did not fit . Metric Allen key fitted fine screw did tighten up O/k Changed it any way after checking the thread ,because the correct thread was BSF.

Brian