Member postings for bernard towers

It was always my understanding that when pinion teeth counts go under a certain number the dims do not follow the mathematical sizes. If you look at HPC or DAVALL they change the size from ideal to slightly smaller, they do explain why in their catalogues.

Try Simon Michlmayr & co ltd. Tempus Works. Fletcher Way Norwich NR3 3ST. 01603 403687

silver solder the hole up and start again

Edited By bernard towers on 03/11/2022 08:18:51

tenacity 5 flux is what you need to use and if job is quenched while fairly hot it usually dislodges most of the flux but the rest will have to be mechanically removed.

No mention of what cutter profile he used, I would have thought internal teeth had a completely different profile. No mention of them on Thorntons site.

you don't have a Ferrari and put Duckams 20/50 in it why would you use inferior oil on something that's taken a good portion of your leisure time making

Lowmex 2022 now on YouTube

How does that make them differential?

Don't forget that a traction engine boiler is not only a pressure vessel but a chassis as well having to take a few knocks and bumps on the way which yours would not have to worry about. Just a thought.

Yes that's good stuff G. C. I use it also for making felt grease seals for vintage motorcycle hub bearings.

Peter why not prep your frame/stand then take it to a local man who makes gates etc, he would most probably Mig it for a drink.

You're doing it because you can and looks a good job too and definitely better than doing the gardening. Me I'm getting stuff ready for Lowmex hope the weather stays ok.

I used a lot of old screwdrivers as the basis for nut runners, using various socket heads for the business end

Do you honestly begrudge that 5 or 10 mins? if so practice practice practice

Only ever had coffee while out on the bike

link doesn't seem to work

try googling toothed belt specs there's a lot of info on there

If you look at the Clarkson t & c grinder the rack sticks out on that and its one of the best regarded grinders. The stent is really just its baby. I have been using mine (short base ) for 35+ years without any real problems. The only part I did not like was the rear mounted table stops so made the popular design that fits on the front of the machine.

Most of the tools on dealers stalls are ex industry not Far Eastern hence the price.

First one you have missed for a long while Noel, would have to be the year you changed disciplines.