Molesworth''s HandBook

I bought this gem of a book at the Charity Shop today

Thirty Fourth Edition, dated 1951

A superb reference book, to complement Machinery's Handbook [etc.]

MichaelG.

.

Sorry about the subtitle ... Forum software can't handle the ae 

Edited By Michael Gilligan on 01/03/2013 18:23:05

Hi Michael

I have a copy of Molesworth's fascinating little book - Twenty Fourth Edition, dated 1901!

In it is a copy of the preface to the first edition, dated November 1862!!

There are numerous old adverts at the front and back covering all sorts of ancient machinery, even one claiming the 'efficiency and economy' of the 'World-Renowned EDISWAN Incandescent Electric Lamp'...!!! Needless to say, it's leather cover is getting a little dog-eared now!

My copy of Machinery's Handbook is the edition of 1942. It holds a section on the use of a slide rule - when did you last use one of those? Can't think of life without a pocket calculator now ....

My! What progress we have seen over our lifetime! Remarkable ..!

Trevor T

Anybody interested in older books on machining and allied disciplines might get some use of these sites. They have a lot of scanned copies of older reference books. Enjoy.

**LINK**

**LINK**

John

.

Trevor,

Your comment about Slide Rule reminds me ...

About 30 years ago, our Daughter wanted a Calculator for use at School.

Beastly Dad insisted that she must explain the working principle of Multiplication and Division on a Slide Rule, before she could have a Calculator !

I don't think she has ever forgiven me.

MichaelG.

Edited By Michael Gilligan on 01/03/2013 22:54:16

Oh ! how much easier it is to do calcs today. I had to do lots of trig with 7 figure logarithms in my younger days as a toolmaker. Colin

I have a Molesworth's pocket book. Although it does have a lot of useful information, a great deal of it appears to be a bit esoteric. Frankly I got a bit irritated that it never seemed to have the information I really wanted! I'm not sure there isn't a section of formulae for working out how to taper wallpaper to do the inside of a lighthouse...

Michael, we should add Napier's Bones to your list.

My daughter asks "Why should I learn long division? When am I ever going to be without a calculator?"

Asiode from suggesting she watches Flight of the Pheonix, I struggle to give a truly convincing answer.

Neil

For my ref needs I have:

Machiner'ys Handbook 15th edition-1956

Newnes Mechanical Engineers pocketbook 1990 ed.

Zeus databook metric edition.

Workshop Practice editions # 2-3-15-20-22-35-49

The Compact Lathe by stan Bray

Model Egineers Handbook (2nd ed.) by Tubal Cain, a superb ref. book I might add,

Assortment of manufacturers freebies e.g. Presto/Dormer(usual disclaimer) drilling & milling ref pocketbook etc,etc.

Various ref notes from my days as a Mech.Eng. Instructor in a training establishment, so I reckon I am pretty well covered for information, & yet I am amazed at the wealth of knowledge shown by members of MEW forums, a lot of it had me thinking back many many years & saying to myself 'I'd forgotton about that, many times I have thought 'why didn't I think of that! when I have usually 'overthought & overengineered 'simple stuff, to the point of not doing productive stuff.

I must offer my thanks to all members for reminding /refreshing my old grey matter now that I am retired & have a little more time to concentrate on Model Eng. long may it continue.

Regards

George.

Well, there's a disappointment, I was hoping for words of wisdom from that grate centre of learning, St Custard's. What a chiz.

Andrew

Falco, thanks for those links, started downloading to my Kindle already, isnt technology wonderful!!

Chris Gunn