By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by Forum House Ad Zone

im a beginner but i am in my 80s

i would like to meet a fellow model engineer in mid cornwall

All Topics | Latest Posts

Search for:  in Thread Title in  
william wiggins07/03/2011 19:56:40
5 forum posts
i would like to meet a fellow model engineer talented or not in the indian queens area,. i have gone in at the deep end and i have purchased a lathe which is a real bull from amadeal. i am now waiting for a vertical slide to come. so i can learn some simple milling.i am not at all efficient yet on the lathe.i am attempting to make a mill steam engine.and their are parts of the plans i am unable to u
nderstand. i would welcome any help that their might be out there.regard old bill p s. is their any good companies for buying metal in reasonable sizes
Colin Jacobs 107/03/2011 20:29:21
69 forum posts
2 photos
I hope u find someone I too am a (40 something) beginner and have found three local engineers who I intend to meet at one stage. Welcome along to the forum
ady07/03/2011 23:36:16
612 forum posts
50 photos
You might be better off searching for a modelling club in your locality.
 
william wiggins08/03/2011 13:29:26
5 forum posts
thank you for your replies to my first post. i have looked for a club in my area but very little happens in cornwall. i needed some 1 iinch by 1 inch brass less than 2 "long. i have had to buy over £20.00 worth. to get it .i now have enough of that size brass for the rest of my life.i am supprised there is not a consortium within the model engineering community to club together to enable modelers to buy metals they need in smaller amounts.thank you once again colin and ady for your response regard bill
Keith Long08/03/2011 14:11:55
883 forum posts
11 photos

Hi Bill

It might be worth going to have a look at South West Surplus Tools, on the Redruth - Portreath road. They do a lot of second hand tooling and I think also sell some materials, certainly do for wood turners anyway. When you go past the "Gold" place (old Tolgus tin-streaming mill) the business park is on the right-hand side of the road heading towards Portreath. One of my regular visits when I'm in Cornwall - also have a look in Trago Mills.

Keith

Edited By Keith Long on 08/03/2011 14:12:37

David Clark 108/03/2011 14:15:00
avatar
3357 forum posts
112 photos
10 articles
Hi There
The best place for a small amount of metal is EBay.
Several suppliers on there would probably cut to your requirements.
regards David
 
wotsit08/03/2011 17:28:12
188 forum posts
1 photos
What's wrong with Capital Letters and punctuation these days? - they were invented to make text more legible. The lack of these features just makes posts harder to read, so I just don't bother now when I see the mass of small gray text - e.e. cummings (and probably phone texting) has a lot to answer for.
 
 
mgj08/03/2011 17:45:24
1017 forum posts
14 photos
If you are stuck for materials, I'd try Live Steam Models and Blackgates. May not be absolutely the cheapest, but they do have everything, and you can buy small quantities of stuff. In fact they expect you to, because some materials are priced by the inch. I've regularly bought 6" of this or that, and  less sometimes.
 
Both are pretty quick. 
 
Possibly others offer the same service as well.
 

Edited By mgj on 08/03/2011 17:47:42

KWIL08/03/2011 19:21:48
3681 forum posts
70 photos
Folkestone Enginering Supplies has 1" sq brass at £8.98 per 150mm, that's £3 for your  2"

Edited By KWIL on 08/03/2011 19:26:09

JasonB08/03/2011 19:36:43
avatar
25215 forum posts
3105 photos
1 articles
Or £2.50 from Noggin End and they will sell by the inch.
 
J
Martin Cottrell08/03/2011 21:39:37
297 forum posts
18 photos
Posted by Keith Wardill on 08/03/2011 17:28:12:
What's wrong with Capital Letters and punctuation these days? - they were invented to make text more legible. The lack of these features just makes posts harder to read, so I just don't bother now when I see the mass of small gray text - e.e. cummings (and probably phone texting) has a lot to answer for.
 
 
Hey Keith, cut the guy some slack! Not only is this guy in his eighties & just starting a new hobby as complex as ours but he has also embraced the computer age and used this forum to ask for help with his new found interest. I for one take my hat off to Bill and would hate to think that he is made to feel unwelcome because he hasn't yet found the 'shift' key on his keyboard!
 
On the subject of correct punctuation and use of capitals, when I was at school we were taught that a question mark punctuated the end of a sentence. As such, your second sentence should omit the leading hyphen and the first word (they) should begin with a capital T.
 
Regards, Martin.
Pat Bravery08/03/2011 21:49:32
avatar
96 forum posts
24 photos
And Keith, you have used the American spelling of grey, when in glass houses and so on. Regards Pat
william wiggins08/03/2011 23:09:35
5 forum posts
HI Guys Thank you all for your replies to my first thread.I will take note of advice offered,even the very critical one from Keith.Note the use of capital letters Regard Bill
Martin Cottrell08/03/2011 23:29:30
297 forum posts
18 photos
Nice one Bill, good luck with your mill engine!
 
Regards, Martin.
Terryd09/03/2011 08:02:21
avatar
1946 forum posts
179 photos
hi Bill,
 
two other suppliers of small quantities of materials who cut to size are College Engineering Supplies and Macc Models. The latter often has stuff at excellent prices and both have online catalogues and do delivery order at cost (at least Macc Models do).
 
By the way, you could do what others do with your surplus if you're you don't need it and that is to sell it on eBay and make your money back.
 
Enjoy the hobby
 
Best regards
 
Terry
 

Niloch09/03/2011 09:10:42
371 forum posts
Bill,
I suspect you will already be aware of the Perranporth & District M. E. Society which must be about a dozen miles away from you. It's possible that one of their members lives much nearer to you.
I haven't been able to find a web site, although, I did find a name, presumably an officer of the club: Keith Rolleston [email protected]
wotsit09/03/2011 20:00:16
188 forum posts
1 photos
Posted by william wiggins on 08/03/2011 23:09:35:
HI Guys Thank you all for your replies to my first thread.I will take note of advice offered,even the very critical one from Keith.Note the use of capital letters Regard Bill
Hi, William,
 
Sorry that you took my comment as 'very critical', as did several other contributors - some very sensitive people around, it seems. Good luck with your lathe and the Mill engine.
 
To Martin: I too am in my eighties like WIlliam - why should that make computer use difficult?

To Patrick: How do you know what my nationality is?
 
Regards.
Keith.
 
Martin Cottrell09/03/2011 23:27:51
297 forum posts
18 photos
Hi Keith,
 
It seems I should be taking my hat off to you also. I have two male relatives in their eighties in my extended family, both of whom seem to spend more time sleeping during the day than my cat! Obviously an interest in model engineering keeps the mind and body active!
 
As for the computer comment, you are of course correct. Indeed I had to point out to my 10 year old grandson the other day that I was quite capable of operating a computer having been playing with them since a time when his mother was just a glint in my eye!
 
Regards, Martin.
wotsit10/03/2011 14:43:55
188 forum posts
1 photos
Hi, Martin,
Thanks for the comments - I have aways had an interest in computing, which maybe gave me a head start - I worked on mainframe computers long ago in the past. The first one I ever saw was Atlas at Manchester University, and the first one I worked on was a Elliott 805 (i think it was) back in the early 1960s - this was a serial machine, with a 1kiloword magnetic core store memory, wordlength of 18 bits. It had to be programmed using punched paper tape using Eliott Autocode and output was to a teletype machine. They consisted of a number of cabinets about 1.5 metres tall and a metre wide, and there were 4 or 5 cabinets, depending on the functionality. They were started up using the same type of batteries which were fitted in Concorde - PCs are eezy-peezy after those monsters.
 
So, I can understand the amount of time one can save if computers are used efficiently, hence what was intended to be a gentle dig at the use of only lower case. I guess everyone gets to a point where resolving fine details becomes harder, and in these days of texting mania, I just felt it was time to point out that text written in lower case can be more difficult than need be to understand, particularly when, as did William, trade names are used. Life is too short to waste
Best Regards,
Keith
Trevor White13/03/2011 17:55:26
2 forum posts
I have been asked by Jim Penaluna, who is the secretary of the Perranporth and District Model Engineering Society,to offer his email and phone number. This could help in your quest to find help with your project.
 
 
phone 01637 830 490
 
some dates that might be of use
The club will run its portable track 5" guage at the following:-
 
Bodmin & Wenford Railway, Bodmin General Station:-
April 22 to 25, May 29 to 30, June 19 to 19, August 5 to 7 and August 28 to 29.
 
Trevithick Day Camborne April 30
 
Wheels at the Royal Cornwall Show Ground Wadebridge July 17
 
members of the club will be at these events if you would like to ask questions
 
 
hope this is of help and good luck with your project
 
trevor

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Sign up to our Newsletter

Sign up to our newsletter and get a free digital issue.

You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy

Latest Forum Posts
Support Our Partners
cowells
Sarik
MERIDIENNE EXHIBITIONS LTD
Shopping Partners
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest

 

Donate

donate