Depth Guage

I have a 1-2 inch depth gauge but I need a zero to 1 inch. I have searched Moor and Wrights website and ebay but cannot find anybody selling these. Cannot find the rods on any of the sights that I have searched through. The rod measures 3.12mm / 123 thousands of inch (diameter). Does anybody know where these can be obtained.

Any info is great appreaciated, Many thanks, Alan

I have several depth micrometers and over the last 50 years have only once bought a replacement rod. This was for a Starrett make, the price bears no relation to what you get. I suggest you will be better off buying a new depth mic. Look out for offers with the likes of MSC.

Would you consider making a rod from a piece of 1/8” silver steel? The only problem is to make the end square and flat, I thought about drilling a hole in a block and lapping the end but whether this would make a serious metrology tool I don’t know, but it might be ok if the odd tenth is not critical.

Mike

Bowers Group now own the Moor and Wright brand.

look at page 10 on the link below

**LINK**

Don't know if they will deal direct, or if there's a minimum order.

Just check the diameter of the ones in the link, the only depth gauges they now sell have thicker rods than yours.

Good Morning Alan Girvan,

We are a authorised stockist and dealer of Bowers Metrology, which includes Moore and Wright spare parts, if you need any pricing/availability on any spare parts feel free to contact me.

We also stock and sell a range of 0-1” depth gauges, Please see link below to our website.

**LINK**

We are attending the Midlands Model Engineering exhibition this week, if you are also in attendance then we can bring units along for you to have a look at, we need to know by 10am tomorrow so we can get onto the van.

If you require any further assistance please do not hesitate to contact me at [email protected] or 01992 450780.

Kind Regards

Alice Coles

Edited By Machine-DRO on 16/10/2018 11:27:48

Edited By Machine-DRO on 16/10/2018 11:28:21