By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by Forum House Ad Zone

kennedy hacksaw

All Topics | Latest Posts

Search for:  in Thread Title in  
Eric Arthrell08/06/2017 06:52:00
47 forum posts
19 photos

Hello fellow swarf makers.

Just acquired a kennedy 60 hacksaw with a Lothian motor "1970 ish would have liked a 90 but quite rare so the 60 will do" waiting on delivery should be ideal for my requirements and a good addition to my small work shops.

Regards Eric

Martin King 208/06/2017 07:12:43
avatar
1129 forum posts
1 photos

Found my Kennedy at an auction described as a 'firewood kindling cutter', got it for £7 + commission!

Cleaned it up and it is one of my most used tools. Odd thing was, about a week before I bought a brand new WARCO bandsaw which now gets zero use!

Funny old world!

Cheers, Martin

Engine Builder08/06/2017 08:56:04
avatar
267 forum posts

"Found my Kennedy at an auction described as a 'firewood kindling cutter', got it for £7 + commission!"

A bit like describing a lathe as a pencil sharpener.

Eric Arthrell08/06/2017 11:48:13
47 forum posts
19 photos

You did really well to get it at that price.

I paid £82 for mine, might seem a lot but I like old machine tools , lets face it you have to pay £1+ for a box of matches and God knows how much for a night out.

If they are still going strong after 50+ years then it good enough for me,

Martin King 208/06/2017 11:52:59
avatar
1129 forum posts
1 photos

Eric, £82 is not dear IMHO, I have turned down £130 for mine as I will probably never find another. I get a kick out of drinking a cuppa while watching it do its thing on a big chunk of material, a bit like watching a shaper.

Cheers,

Martin

Martin King 208/06/2017 12:19:42
avatar
1129 forum posts
1 photos
Posted by Engine Builder on 08/06/2017 08:56:04:

"Found my Kennedy at an auction described as a 'firewood kindling cutter', got it for £7 + commission!"

A bit like describing a lathe as a pencil sharpener.

The best auction mis description I ever had was a lot consisting of a cased microscope and "wooden cased sectioned central heating valves", got it for £70 +comm.

The microscope was a nice Zeiss which gave me a decent profit on the lot but the 'central heating valves' were a beautiful and very rare velvet lined mahogany cased set of Victorian sectioned experimental Artillery Fuze heads from about the Boer war era. They went bonkers when I took them to the Armoury at Lulworth Camp to find out about them, sent photos to the War Museum; got an old retired armourer to come in and look at them, he said he'd never seen the like etc etc.

fuse a.jpg

Finally made nearly £900 on EBay and the buyer drove from Yorkshire to me in Dorset as he would not trust them to any form of courier, did not even stop for a cup of tea, straight back home! Said he would have been happy to bid a lot moe for them.

Mind youI have known of Yorkshire men who get nosebleeds if they come further south than Leeds! smiley

Robbo08/06/2017 12:33:30
1504 forum posts
142 photos

""Mind youI have known of Yorkshire men who get nosebleeds if they come further south than Leeds! smiley""

You mean there IS something South of Leeds - are there Dragons?

mechman4808/06/2017 14:09:18
avatar
2947 forum posts
468 photos

...You mean there IS something South of Leeds - are there Dragons?

​I believe there is a place called Mercia that has Dragons, with some scattered tribes & mountains... I also understand that there is some marshy place called Wessex further down than that, some big wig local tribal chief called 'Arthur' I hear... we're ok 'up ere in t' north', ave 'ad many a good rave up in our nearest local long house in a place called 'Jorvick'... don't like the idea of having to leave our shields & spears outside though'... face 20 devil

George.

Eric Arthrell08/06/2017 14:56:37
47 forum posts
19 photos

Thank you for your replies.

My best deal was an AVO mk 5? valve tester paid £10 used it for a few years sold it for £500, mind you I do miss it find it hard to let things go .

I don't like buying new like to feel the vibes of old tools etc

possible hoarder in the making ?

Eric Arthrell13/06/2017 06:46:21
47 forum posts
19 photos

Well hack saw arrived quite good condition for 50years old?.

Need to drill and tap stripped motor hold down bolt holes to 6mm

the oil damper operates on the same principle as a toilet flush system ie a thin diaphragm .

I cut a thin plastic disc from a marg tub and placed it between the metal washer and the holed damper block and it now works a treat .

Well pleased.

Eric

Martin King 213/06/2017 07:12:21
avatar
1129 forum posts
1 photos

Eric, Pleased that you gota 'good'un'! Have lots of fun with it.

Martin

John Stevenson13/06/2017 08:24:42
avatar
5068 forum posts
3 photos
I bought one of these,brand new for about 120 pounds many years ago and without a doubt it was the biggest piece of crap I have ever owned. OK it worked as stated but so slow it was painful to watch. As soon as Graham Engineering started selling the 150 pound 6"x 4" I was there.
That machine, in its day probably did more work than the lathe and mill at the time. I well remember 5 gallon drums with the top cut off filled with swarf from the saw.
IIRC I sold the Kennedy for about ninety pounds to some unsuspecting punter.

Somewhere there ought to be a shelf with examples of the crap we used to sell before we started moaning about imports

Things like the Winfield lathe, the Poole lathe and let us not forget the Sooper Adapt
David Standing 113/06/2017 08:50:43
1297 forum posts
50 photos
Posted by John Stevenson on 13/06/2017 08:24:42:


Things like the Winfield lathe, the Poole lathe and let us not forget the Sooper Adapt

John

Is that a modified version of the Super Adept? cheeky.

David Standing 113/06/2017 08:52:14
1297 forum posts
50 photos

But seriously, I have a Kennedy, and it is fine in a home workshop, but would be out of its depth in a commercial environment.

roy entwistle13/06/2017 08:57:22
1716 forum posts

There where plenty of them and Manchester and Rapidor used in industry.

Roy

Clive India13/06/2017 08:58:55
avatar
277 forum posts

I did own one for a while but went for a bandsaw instead. OK for what I wanted to do at the time in the space I had to do it in.

I did change the belt system from flat to V though.

Popular item, sought-after. It was not difficult to sell, but I had grown out of it.

John Stevenson13/06/2017 09:42:04
avatar
5068 forum posts
3 photos
At the time mine was in a home workshop environment nothing commercial at that time. It's output was pathetic, I could actually saw faster by hand

OK some say you can be doing something else whist it's cutting but I was always waiting for the next piece.
Eric Arthrell13/06/2017 12:50:32
47 forum posts
19 photos

High output or industrial use not really practicable .

But for an old retired fabricator welder who spent his working life chasing time it's relaxing.

to sit on the bench listening to the beat of the little saw whilst drinking a cup of coffee is shear bliss. I do understand that if you have a lot of cutting to do it will most likely be the wrong tool for your needs and a little band saw will knock it out of the park.. but I love it . Eric

Martin King 213/06/2017 13:43:57
avatar
1129 forum posts
1 photos

Eric, +1 smiley

Martin

richardandtracy13/06/2017 14:13:38
avatar
943 forum posts
10 photos

Eric, just like a shaper, fascinating to watch, but not very quick.

Regards,

Richard.

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Sign up to our Newsletter

Sign up to our newsletter and get a free digital issue.

You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy

Latest Forum Posts
Support Our Partners
cowells
Sarik
MERIDIENNE EXHIBITIONS LTD
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest

 

Donate

donate