Neil Wyatt | 17/02/2016 09:01:45 |
![]() 19226 forum posts 749 photos 86 articles | I'll try and get along to this one. Hope the club stands have some nice examples of shop made tooling! Neil |
MalcB | 17/02/2016 09:46:26 |
257 forum posts 35 photos | I wouldn't put Anson Engine Museum on your ALSO visit list as it dosnt open until Easter. I think with regard to Event City Shows it may well have been like the one our motorcycle club show at in a couple of months time. As a club we get free entry along with a free double stand area to promote. Money is taken from the business operators who attend and sell. If it was run on a similar basis then maybe there was just not enough cash generated from sellers to keep it viable. |
roy entwistle | 27/02/2016 11:48:13 |
1716 forum posts | Went to Middleton this morning Car park full at 10-15 Was directed to Tesco also full and with a time limit so came home Glad i,d not prebooked entrance ticket |
Robbo | 27/02/2016 14:17:01 |
1504 forum posts 142 photos | Thanks for that Roy, might have to rethink my planned visit tomorrow. |
peter ravenscroft | 27/02/2016 15:04:18 |
100 forum posts 3 photos | i parked in a street around the corner only a 5 mins walk regards peter
|
duncan webster | 27/02/2016 16:04:15 |
5307 forum posts 83 photos | Excellent standard of exhibits, but poor venue, short of car parking and very crowded inside. Queue for the cafe was a joke. I hope they do it again, but needs more space |
Robbo | 27/02/2016 16:13:30 |
1504 forum posts 142 photos | I need room inside to manoeuvre the electric 'chair. Full car park = crowded inside. |
Neil Wyatt | 27/02/2016 17:43:23 |
![]() 19226 forum posts 749 photos 86 articles | Went today, a small but good exhibition, rather crowded, but that's the penalty of success. The downside of Sandown was that its so big it feels half empty even when lots of people are in it! Not much tooling on show, mostly locos but some nice stationary engines as well. A modest but varied representation from the trade - Tony very cheerful on the Chester stand with a rapidly diminishing pile of mini-lathes. Stocked up on carbide inserts from JB and a bit of metal from Blackgates. Met a few folks, but I suspect my beard may have confused a few folks Neil |
Ian P | 27/02/2016 18:46:30 |
![]() 2747 forum posts 123 photos | Posted by Neil Wyatt on 27/02/2016 17:43:23:
Met a few folks, but I suspect my beard may have confused a few folks Neil Your disguise worked on me! I did see someone that I thought I recognised but then I thought, 'no it cant be'. I too bought carbide bits off JB but metal was from Noggin End also some Delrin offcuts from Parkside (I think). Lots of nice models but the narrow aisle between the stands made viewing difficult. As others have said the car park is small but there are plenty of side streets a five minute walk away. Ian P
|
John Stevenson | 27/02/2016 19:05:03 |
![]() 5068 forum posts 3 photos | Posted by roy entwistle on 27/02/2016 11:48:13:
Went to Middleton this morning Car park full at 10-15 Was directed to Tesco also full and with a time limit so came home Glad i,d not prebooked entrance ticket .
Good job we weren't relying on you at Normandy |
roy entwistle | 27/02/2016 20:33:39 |
1716 forum posts | John At 82 I know my limits |
Boiler Bri | 27/02/2016 21:39:30 |
![]() 856 forum posts 212 photos |
Thank you for the posts. I passed the venue the other day and thought it looked a bit small. Probably go for a ride to Blackpool and have a walk up the front instead. Nowt I want anyway from the dealers. Nice one Roy good on you for trying
Bri
Edited By Boiler Bri on 27/02/2016 21:41:16 |
Bazyle | 27/02/2016 23:39:50 |
![]() 6956 forum posts 229 photos | Posted by Neil Wyatt on 27/02/2016 17:43:23:
Met a few folks, but I suspect my beard may have confused a few folks Neil Avatar update before Brooklands? |
Neil Wyatt | 28/02/2016 07:23:37 |
![]() 19226 forum posts 749 photos 86 articles | Posted by Bazyle on 27/02/2016 23:39:50:
Posted by Neil Wyatt on 27/02/2016 17:43:23:
Met a few folks, but I suspect my beard may have confused a few folks Neil Avatar update before Brooklands? Shave before Brooklands I grow a beard now an again, but now it's reaching the itchy stage it can go! Neil |
RRMBK | 28/02/2016 20:52:09 |
159 forum posts 18 photos | Went today. busy but not overly so.. really nice and friendly atmosphere. small but nice venue.. I hope the turnout gives confidence to the organisers to repeat next year. Thanks for all your hard work, some really inspiring examples of workmanship on show. BK |
shaun meakin 1 | 29/02/2016 13:02:01 |
![]() 62 forum posts 1 photos | Just a quick post to say 'well done' to all involved with the Manchester Exhibition. Nothing was too much trouble for the stewards and staff. They were all very helpful throughout to both traders and exhibitors. Yes Saturday morning was a bit chaotic with the amount of people there but they organisers reacted immediately and opened the doors to the exhibition early to aid the flow of visitors. We at CuP Alloys look forward to next year's event.
|
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
Sign up to our newsletter and get a free digital issue.
You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.