Member postings for Ziggar

i too have looked at this kit for quite some time now and wondered the same thing. Would it be possible to use ali instead of the cast iron suggested.

far easier to machine and obtain than the cast. also a bit cheaper. cleaner to machine. no dust to clean up.

So im watching this with more than a little interest. I hope there are some good answers to mull over

Z

or you could just click this

this should help some

**LINK**

try this

http://www.cgtk.co.uk/metalwork/linear

a few other neat tools on there too

Z

i built my shed 2 years ago now. brand new bought from the local shed and general garden wooden building emporium which has now disappeared..!!

I insulated with 1 inch thick/thin polystyrene boards. Floor, roof, walls and door. then laid10mm plywood from the local plywood supplier over the top of that. Again, floor, roof, walls and door. my 12X6 shed now measures 5'6" by 11'6" internally.

in addition to this i use a small cheapo electrical blow heater set to give a low, comfortable heat, and left turned on 24/7. It gets turned up slightly in the colder weather that invades my small area of the world [UK] occasionally, but otherwise is left alone.

I have absolutely NO condensation at all. At least i have seen NONE at all in the time the shed has been built and inhabited. it contains tools such as a lathe and a miller and associated tools and lots of wooden cabinets to support and store said tools. Again,NO condensation.

make of this what you will. there are also 3 windows in the shed. Glass. and never a bead of damp on any of them.

in the past 2 years i have had ZERO - 0% of condensation.

cost of the heater is minimal due to the thermostatic control.

Edited By Ziggar on 12/11/2013 22:02:49

just make one to fit.........

don't need a drawing

i just did the exact same thing when i acquired one without the bolt and bottom swivel, simply made them to fit

Z

flange nuts

search ebay for them - millions on there

you could just go here

http://tinyurl.com/mvrw44w

yes

it was made earlier than the others........................

mine is SK 8353 - even earlier still

Z

yes you have

Thank you for that Katy

and Good Luck with that
its a ridiculous way of doing it.

Graham, can i suggest that you take a look at the monitor settings you have chosen, ie. brightness, contrast, colour, and any other settings available to you
it may pay you to change it from RGB to individual colour settings or vice versa

and also to have a look in your settings/control panel at your display settings and also, [dont know what MS calls it] your Accessability settings. See what you have available for making the screen easier to look at in general

Z

PS

if you do go ahead and use the suggested setting for alowing all pages to be rendered in YOUR choice of colours, then it strips away ALL colours on all pages. Basically turns everything into a sea of black, white, red and blue. Which from what you've said may be too much of a stark contrast for you. But you can of course try it and set it back if you dont lie it.

Edited By Ziggar on 05/10/2013 10:58:59

Edited By Ziggar on 05/10/2013 10:59:20

you could just click on the link as its asking you to..................

Spam Arrest is a well established anti spam filter software that has been in circulation for years

http://corp.spamarrest.com/howitworks2/

but that option isnt available on a page by page choice

you do it once and it effects ALL sites

it basically uses the default colour choices for web page creation
blue for unvisited links, red for visited links

Z

how does that work then ??????

Katy, thanks for the explanation.

Again,as i said in my previous answer to Davids reply, which crossed with yours timewise, it was not clear nor had anything actually been explained in plain terms.

Again, now i understand that you are the IT person, this wasnt explained before. David has his role, this wasnt exactly explained clearly previously either. But both questions have now been answered nce and clearly so that even an idiot like me can understand. The answers were clear and precise and from the horses mouths, so to speak.

Not assumptions and guesswork...........

i make no apologies for asking the question in the first place

David thanks for the explanation

now i understand, whereas before it wasnt explained by anyone or exactly clear what was happening
at least thats how i saw it

Edited By Ziggar on 01/10/2013 16:19:49

nice one John

just installed it and had a quick look and it works just fine

im not a mod or owner of any groups but i did miss the old look. the new one is too fiddly and stuff is hidden

as a user im happy with that add-on

can i ask why you, Katy, are here sorting this mess out while the two supposed editors/moderators that should be here are nowhere to be seen and can only be assumed to be in hiding ?

Z

any news on why my account has been tampered with ?

and the text in the above post is flooding outside of the box and into the white area on the right

another problem not fixed