Here is a list of all the postings blowlamp has made in our forums. Click on a thread name to jump to the thread.
Thread: 900 million covid cases |
14/01/2023 22:32:22 |
Dr John Campbell, talking about excess deaths.
|
14/01/2023 22:15:19 |
Posted by peak4 on 14/01/2023 22:00:36:
Posted by blowlamp on 14/01/2023 21:51:48:
.................
Some more things for you to deny here: https://yellowcard.ukcolumn.org/yellow-card-reports Readers with an open mind, please have a have a look here, again at Media Bias Factcheck
Detailed ReportBias Rating: RIGHT CONSPIRACY HistoryThe UK Column is an alternative multimedia news website and associated British news pamphlet launched in January 2006. UK Column is headquartered in Plymouth in South West England. Mike Robinson is the editor of the UK Column, and Brian Gerrish is the Author/Editor/Owner of the UK Column Newspaper. Further, Brian Gerrish has appeared on US conspiracy theorist Alex Jones’s show.
How do you know you can trust mediabiasfactcheck.com - who has checked them out, or are you just assuming they're OK because of their name? Something mediabiasfactcheck.com probably haven't mentioned about UK Column is that they always use official data or sustantiated data to back up their claims. The Yellow Card info is the official data. |
14/01/2023 21:51:48 |
Posted by peak4 on 14/01/2023 21:32:40:
Posted by blowlamp on 14/01/2023 19:48:52:
Posted by Martin Kyte on 14/01/2023 18:44:19:
Just imagine the carnage without the vaccines,
Have you not seen the carnage because of them? No not really, and I'd suggest neither have you. See also here from one of the fact checking sites. Edited By peak4 on 14/01/2023 21:36:39
You seem to be arguing against the multiple Doctors and Surgeons in the videos. I'm just following the science. Some more things for you to deny here: https://yellowcard.ukcolumn.org/yellow-card-reports |
14/01/2023 21:36:38 |
Posted by Journeyman on 14/01/2023 21:07:22:
From Wikipedia: The World Council for Health is a pseudo-medical organisation dedicated to spreading misinformation about COVID-19 vaccines and promoting fake COVID-19 treatments. Say no more... John
From Wikipedia?... ...Say no more. |
14/01/2023 21:33:44 |
Posted by Martin Kyte on 14/01/2023 21:18:05:
as I said, nope.
But, but, the BBC ! |
14/01/2023 20:36:23 |
Posted by Martin Kyte on 14/01/2023 20:25:05:
Nope
Doctors in the video talking about the effects here: https://worldcouncilforhealth.org/news/news-releases/uk-doctors-investigation-c19-vaccines/
Also on the BBC here:
Edited By blowlamp on 14/01/2023 20:41:32 |
14/01/2023 19:48:52 |
Posted by Martin Kyte on 14/01/2023 18:44:19:
Just imagine the carnage without the vaccines,
Have you not seen the carnage because of them? |
Thread: CAM software for Lathes |
13/01/2023 19:20:43 |
Posted by Les Riley on 13/01/2023 16:47:50:
Posted by blowlamp on 13/01/2023 13:01:11:
I find Ecam to be very good. I tried Fusion 360, but still prefer Ecam as it seems easier to set up and use. CamBam isn't ideal for lathe as many useful lathe specific functions are missing.
Martin. I have just had a look at Ecam and it looks interesting. However the price is a bit too much for my very occasional lathe use. Though it does do milling as well I suppose.
Les
Les. It may help you to know that Ecam is free to use at the weekend. This means that you can do everything else except produce gcode during the week. So you can draw & edit your work whenever you want, but only make gcode on Saturday & Sunday.
Martin. Edited By blowlamp on 13/01/2023 19:21:38 |
13/01/2023 13:01:11 |
I find Ecam to be very good. I tried Fusion 360, but still prefer Ecam as it seems easier to set up and use. CamBam isn't ideal for lathe as many useful lathe specific functions are missing.
Martin. |
Thread: Vent - please ignore |
13/01/2023 00:02:34 |
Posted by Bezzer on 12/01/2023 23:16:33:
My real hate is/was is "There's no I in team". When it came out years ago in the early days of corporate speak I got the instructor at a refresher course I was on spluttering for an answer when I piped up "But there is me in it". Had to use that a few more times since then.
|
12/01/2023 13:16:50 |
"Now available for 'pre-order'." |
Thread: Anyone have experience of PIV (Positive Input Ventilation) |
11/01/2023 21:07:58 |
Posted by Graham Stoppani on 11/01/2023 20:46:14:
Our main reasons for installing the system was that it allowed to change all our windows so that none of them open. Better for insulation and security. It also allowed us to filter the incoming air.
Graham
I can't imagine living anywhere with no opening windows. Summer would be unbearable for me.
Martin. |
Thread: Coughs and colds |
06/01/2023 15:40:26 |
Posted by Nigel Graham 2 on 06/01/2023 15:35:17:
Is this thread being satirical or edging a bit close to the "P" word....?
Deep breaths Nigel, deep breaths. |
06/01/2023 15:23:01 |
Posted by Dr. MC Black on 06/01/2023 14:53:23:
Posted by blowlamp on 06/01/2023 14:26:15:
Seems to me that being locked up together would be the best way pass things on to one another. NOT if they were isolated in single cells MC
So a month in solitary confinement for a family of four, that want to visit family for two weeks. Thank you, Doctor. |
06/01/2023 14:26:15 |
Posted by Dr. MC Black on 06/01/2023 13:49:22:
If visitors from overseas were monitored and quarantined, it would reduce the opportunity for the Covid to spread. Telling people to self-isolate is a waste of time. A better solution would be to ban all international travel completely but some people would complain. The Government seems more interested in business than people. MC
Seems to me that being locked up together would be the best way pass things on to one another.
If there were a problem with 'foreigners' coming here, then I'm sure the Government wouldn't be picking them up in the English Channel and housing them in hotels all around the UK - would they? After all, we know they "follow the science".
|
06/01/2023 13:40:51 |
Posted by Dr. MC Black on 06/01/2023 12:04:06:
It seems to me that anybody coming into the country from anywhere should be required to be put in secure quarantine for a month - and I mean really secure - somewhere like the Prison on Dartmoor. Your view may differ MC
Why - what would that do? |
Thread: Serious Readers, serious prices |
03/01/2023 12:08:48 |
Follow this video and you might be able to fix it.
|
Thread: Femi 782 bandsaw |
01/01/2023 20:16:21 |
Posted by jaCK Hobson on 01/01/2023 19:07:23:
80 mm sq steel. I found a way to do it wrong - I now advise against cutting oil and too firm pressure - the blade comes off
I don't think you are meant to use cutting fluid on bandsaws with rubber tyres.
Martin. |
Thread: Solid Edge, the latest version. |
01/01/2023 14:07:11 |
In MoI you can highlight any number of faces, curves or edges and have everything else disappear by 'right-clicking' on the Hide icon. Thus leaving only the highlighted items available for editing etc. Maybe Solid Edge has something similar?
Martin. |
Thread: Storm in America |
28/12/2022 16:47:27 |
Posted by derek hall 1 on 28/12/2022 16:31:49:
Most politicians should not even be in charge of a wheelbarrow
Some people would have you believe they are 'experts'. |
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
Sign up to our newsletter and get a free digital issue.
You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.