Member postings for roy entwistle

I don't recall seeing washers used on mill or winding engines. At least not as here.

Post deleted

Edited By roy entwistle on 21/07/2022 11:53:19

If vegetables screamed when you put them in boiling water, no one would eat them either.

Roy

I have two hearing aids. the batteries last about 2 weeks. If one beeps I change them both

When I was working I had a Morris Marina diesel company car. I used to put a pint of oil in every Monday Morning.

( 1000 -1500 miles.) The dealers claimed that it was within spec. I never had any problems with it and the odometer went all the way round plus about 30000 miles before it was replaced.

Roy

TPI ?

Roy

Their website is still active

Roy

If the filing rest is set up properly, the file should only just touch the rollers as the job is brought to size. The file should not be rubbing hard against the rollers

Roy

Get a new switch from any motor rewinding co.

Roy

If it's a Myford, the three screws only hold the ratchet

Roy

Raysal I don't know but having a different DP from drawings could alter the gear centres specified

Roy

Our camera club does not charge for entries but does expect 10% of the successful bid for club funds. It's surprising how many sellers donate all the bid

It's also surprising how many items will turn up every year

Roy

Andrew He hasn't asked about 1/1/2 oz. but all he's got to do is halve the 1oz

Roy

I have always used all three holes on a three jaw. and on a drill chuck. It was what we were taught at Tech. in the 40s

Roy

I had malwarebytes on my laptop. windows 10 and find that I cannot delete it completely

Roy

One of the better ones

Roy

WD 40 is not a lubricant

I attended  Technical College 1948 to 1950, then one day a week day release then three nights a week.

The first day there, we were lined up in the hall and the teacher went down the line picking us out for Pit , Mill, and Engineering. We decided which course to follow after about three months.

I understand that the local industries paid for the Techs. and that was were they got their apprentices from.

Edited By roy entwistle on 16/06/2022 16:12:39

Double post

Edited By roy entwistle on 16/06/2022 16:14:20

Just a further thought. If you consider how washers are made ie. by punching, they will work harden. try annealing

particularly in brass

Roy