Member postings for Mark P.

Hi John, the belts are A750 and A900, that's what fit my Warco VMC.

Regards Mark P.

Hi Dave, you could probably get a new board from Arc Euro trade.

Regards Mark P.

Being time rich and monetary poor, I tend to use scrap bin materials.

Mark P.

Would it be the same for magnetic chucks?

Mark P.

If it was mine I would steam clean it.

Mark P.

John, have a look on ebay, loads there and I think

that Machine Mart sell motors cheaper than £400.

Mark P.

How about buying a longer similar one and cutting it down? Worked for m

Mark P.

Thanks, looks like I'm stuck with W10 then.

Mark P.

As an aside, can you downgrade from W10 to W7 on a preinstalled laptop?

Happy Christmas to all. Mark P.

I tend to grind all mine at about 10°, works for me.

Mark P.

Neil Young has quite a layout too.

Mark P.

Manny, I started with a WM16 it gave me good service, I traded up to a VMC

as it was more to my needs plus I'd moved house and had a bigger

workshop. I also have a Warco WM250 lathe they both do all I ask of them.

Mark P.

Don't suppose that it could be based on a metronome?

Mark P.

I'm currently building the Muncaster slipper head horizontal engine from scratch but with a piston valve instead of the slide valve. All parts have been machined from steel and cast bar rather than aluminium. The flywheel is a 5'' cast iron trolley wheel.

Mark P.

Quite right Dusty, virtually all power tools can be dangerous without common sense.

Mark P.

Mick, personally I would have thought that a plug tap although not ideal should be ok

if you are careful.

Mark P.

Adrian, every time I've been there's been nowt there.

Mark P.

Just seen some silicone nail art brushes on ebay, various sizes and prices.

Mark P.

Edited By Mark P. on 01/06/2019 18:42:17

Loads on ebay.

Mark P.

I call it bimbling.

Mark P.