By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for mark costello 1

Here is a list of all the postings mark costello 1 has made in our forums. Click on a thread name to jump to the thread.

Thread: A New Way
03/03/2023 21:09:09

He has done much to make life better for Us. If He makes a few shillings doing it, more power to Him.

Thread: bodged thread repair
03/03/2023 21:06:40

When much Younger I spent My excess time lollygagging in an old time auto parts store. One day a customer came in carrying a very bent up piece of wire. He said that They were fishing many miles down river. They shut off their motor to fish and it would not restart. When peering down the spark plug They spied with Their little eye a piece of metal across the hole. They decided that after many miles use of the running motor the siece of metal was stopping the spark from reaching the fuel and shorting out. So they got in there and unwound the piece of metal. Do You see where this is going? Upon trying to put the spark plug back in They discovered the hole was now much too big. They had to row home with only 1 oar. Bought the wire in the shop among the public to find out what it was.

Many more stories like that.

Thread: Dead-Blow Hammer Recommendations Please
03/03/2023 20:51:54

A lead hammer feels more solid to Me.

Thread: Problems with Mardrive
22/02/2023 17:08:20

Used to bandsaw and flycut asbestos. Would be covered completely in white. Did use a facemask to keep out the big lumps. Job ended in 1982. Also used to put My arms in a trichlorethane steam heated vapor degreasing tank ,arms only tingeled once.

Thread: How close have you got to a Darwin Award?
12/02/2023 23:04:55

Me and a neighbor launched an arrow straight up in the air. Had it good and plumb by eye. It came down about 1 foot from Him. No aerial balloons then. Last attempt also.

Thread: Vent - please ignore
13/01/2023 19:58:12

Some Women are WO-MAN's.( Wife does not view this forum.)

Thread: Aircraft General Discussion
10/01/2023 20:39:31

I live on a glide path to a medium used military airport. Several years ago I was outside at night and a military jet went over "darn the noise hit the gas." At around 2 minute intervals 3 more went over. No chance of seeing them as the sound was lagging behind. 2 or 3 days Bengazi was on the news, I figure these were the fighters that were scrambeled then recalled.crying It was a glorious sound to hear when Someone was piloting in anger and meant it. Been to airshows and this was different.

Thread: Storm in America
26/12/2022 18:25:02

Anyone ever write Their name in the snow at -20° ? Somethings Ya just gotta try.

Thread: Yet another scam
26/12/2022 18:20:19

Now and then I use OU812.

Thread: Merry Christmas Everyone!
24/12/2022 19:40:36

Merry Christmas and May The Good Lord bless.

Thread: Storm in America
24/12/2022 19:36:25

I live right in the middle of Ohio which is right in the thick of things. So far just a few bumps in the electric. No wide spread outages. We use wood exclusively for heat, burning only fallen ash die off trees, free heat with the accompining work. We live on a corner of Her parents farm. Well insulated house and more importantly wink a shop that is 1/2 underground and heated with a small gas room heater set on idle. the entrance is through the under garage. To get to "work" I do not even need a coat.The wood stove does not need electric but does work better with it. We are blessed greatly, Me for having a good shop (need more room), and the Wife is blessed for Me having a shop to hibernate to ,leaving Her alone.

Thread: Yet another scam
24/12/2022 19:18:02

I have had a sultry sounding red headed Russian sounding WOman tell Me she was setting in My driveway waiting for Me to come out. I did not even look out the windows. If She would get a hold of Me I would probably be crinkled up for ages.wink

Thread: How to get 9° .38' on a dividing head?
10/12/2022 23:22:46

I have to make 9 rotary splines(?) on a handle and it needs to start 1/2 of a tooth from a feature. Don't know the proper name. The teeth will be cut horizontally with an end mill tapering to the center. 40 to 1 ratio.

09/12/2022 19:52:29

I have an 15-16-17-18-19-20,hole plate. Maybe others. I have to make a handle that has 9 divisions and need to offset the first cut. I could scribe a line but was wondering if it had to be precise how would it be done.

Thread: Snowdon Mountain Railway
29/11/2022 20:39:56

Worked with a Guy, His side work was welding rail up, sidings to factories,etc. Seems cheaper to replace rail rather than weld.

Thread: What Did you do Today 2022
28/11/2022 18:15:47

Bought at a boot sale for $2. Triple epoxy coated paint.collet storage

Thread: You Couldn't Make It Up
18/11/2022 22:30:02

Worked with a Guy arrested for Drunk driving, recieved a light sentence of working weekends at the Sherriffs Dept for around 2-3 years. They let Him go to work during the week. He recieved the job of washing the Sherriffs cars. They knew He was an alcoholic and let Him keep a beer nearby while washing cars.

A friend had a Pinto hatch back, He got stopped for driving too slow. When He got out several empty beer cans fell out of the car. The police asked if they were His, He said yes but He drank them at lunch at work. The hatch back was full of cans up to the top of the seats. Next day at work He got a wheel barrow and emptied 3 loads out.

Another coworker had 5 driving under impaired,kept on driving with no license.

I hope it has changed by now.

Thread: Mini Bender
17/11/2022 20:21:16

Just remember that is how They get to eat. No workee-no eatee.

Thread: Can you help me re-connect my dip switch?
16/11/2022 19:27:35

Virgins are too costly and scarce anything cheaper?

Thread: What is This Please? - Again!!
09/11/2022 19:15:55

Habasit belt press spent 12 years looking at Them and have several for parts.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Sign up to our Newsletter

Sign up to our newsletter and get a free digital issue.

You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy

Latest Forum Posts
Support Our Partners
cowells
Sarik
MERIDIENNE EXHIBITIONS LTD
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest

 

Donate

donate