Member postings for Geoff~

Hi Robin,

What did you end up buying?

I have the same dilemma,

kind regards

Geoff

Many thanks Jim.

I made the mistake of using Ronseals Diamond Hard Varnish on my benches. Great finish but it dissolves in an instant when using IPA or cellulose thinners. Using these mats may save me from having to sand it all off.

Geoff~

Jim,

I'm thinking of doing the same thing - can you give us more detail?

What size mats and where from? Did you glue them on?

thanks

Geoff~

Gordon,

Would love to see a build thread, I want to do this on my SX3.

Geoff~

Hi all,

I want to replace one of the grinding wheels on my 6" bench grinder so I can sharpen my turning tools (brazed carbide tipped) and tungsten carbide masonry drills.

Reading past threads suggests that diamond wheels are the way to go but I'm totally confused by the different array of shapes available. An example of what I mean can be seen here at Arc's page..

**LINK**

So my question is, what shape is for what purpose and what would be recommended for my needs?

thanks in advance

Geoff

Ronan,

I started this thread and I still haven't made my mind up!

You can request free samples and installation guidance from here..

http://www.superfoil.co.uk/sfba/

Geoff

Edited By Geoff~ on 10/01/2015 22:01:15

David, thanks for that.

I subsequently bought the SIEG SC6 from ARC and am also happy!

Geoff~

Les/Michael Horner

many thanks for the link

Geoff~

Les,

I cannot find your LED driver on your website

regards

Geoff~

That sounds like a major investment Graham, which make of tube did you go for?

Geoff~

Dennis,

found this..

"Fareham & District Society of Model Engineers have their "Steam Railway Weekend" on the 26th and 27th of this month (July). This is the annual public open day, so there are also a lot of other attractions and refreshments too. Open from 10:30 to 17:00 both days. Admission charge applies but car parking is free. Set your sat-nav for PO15 5DY ! "

from..

**LINK**

regards

Geoff~

David/John,

Many thanks

Geoff~

Hi,

I'm trying to find a cheaper alternative to Celotex/Kingspan for insulating my shed/workshop. Has anybody used the Bubble Foil type insulation?

**LINK**

regards

Geoff~

Jason,

Thanks for sorting that, I can now see the pictures I was referring to.

Geoff~

Hi,

I was trying to find the pictures he posted of the battered container ship that arrived last November. Found the thread, **LINK**, but all his posts have been removed - why?

Geoff~

Thanks Murray

Geoff~

Found it...

**LINK**

Geoff~

Hi Andrew,

Could you please explain "copper balance"..

thanks

Geoff~

John,

Great job! Could you send me a link to those eBay cells?

Geoff~

Allan,

PLEASE continue to post on this great project. In a year that has seen more than its fair share of negativity, your thread has been one of the highlights and reminds us all of the true purpose of this forum.

There is an interesting thread on the HMEM site on the use of Lanolin for rust prevention.

http://www.homemodelenginemachinist.com/f25/rust-prevention-lanolin-its-better-then-oil-21073/

Geoff~

Edited By Geoff~ on 14/02/2014 10:21:19

Edited By JasonB on 16/02/2014 16:02:57