Beavermill Mk2 - HELP - Missing Small Gear

Hi All,

Need some help please... still very new to the milling/lathe world and trying to get my new/used old lathe and mill up and running.

I have a missing gear on the back of the speed dial, would anyone know what gear i will need to replace the missing one. If not any help on how to measure what gear I woudl need, and best place to get a new gear from?

Might help

Do you have a manual for the machine?

There is an exploded diagram of the variable speed head therein.

The gear is part number 101 P1326. 32DP, 10t

https://www.modelsport.co.uk/product/traxxas-pinion-gear-10-t-32-p-steel-set-screw-437089

Thanks Both,

.... DC31k many thanks will order that gear now

DC31k,

Do you know if there is a downloadable manual for my Beavermill ? Sounds like I could do with it...!!!

Hi, so got that gear but dosn't fit.... bore size was to small. What i need is = 3/16" bore 32DP 10T gear. For love and money can't find any on the internet. Any ideas anyone on where i can buy this small gear?

Antony.

HPC gears of Chesterfield sell the gear that you require. However to bore is 5/32", still too small for your mill.

You will have to hold it carefully, drill it out and ream it 3/16". If that is not possible then HPC could probably machine it to 3/16" bore. Try contacting them, but it will cost more.

Regards. Mike Potts

HPC will increase the bore and/or add keyways to any of their gears. They do charge for this (quite reaonably).

Cool, thanks Michael & Mark.... will do.

Where are you Antony? I can make that gear but I have no idea if it's been made long-addendum so having the parts to offer up would be beneficial