cam gears

Hi, I am considering building the Matador 10 cc four stroke by D Giles, or the Vega v twin.

Has anybody got information as to whether the cam gears for these engines are still available ?

Kevan Gillings

Vega ones should not be a problem to get, Muffet are still going and you can also get 48DP from the likes of HPC

I need to dig out the matador drawings to see what it needs or if you can post the details that would save me looking.

HPC will supply your needs

**LINK**

Matador wants 48DP 10 and 20 crossed helicals

Rod

Edited By Roderick Jenkins on 24/01/2020 16:17:57

Hi Kevan,

I am constructing the Vega Twin at the moment and I, like you was going to ask about the two gears. I have been on to HPC the gears I have ordered are G48 - 12 and  G 48 - 24. They will I need some machining but I think they will be OK.

HPC were very helpfull 

Hope this helps.

Edited By Alan Gordon 4 on 12/02/2020 10:51:46

Alan,

I take it the G48-12 is a 48DP 12 tooth pinion, this is different to that as stated by Rod above, he goes for a 48-10 tooth, which is correct ?

Emgee

Rod is giving details of the Matador, Alan & I gave details of the Vega which just used standard 48DP spur gears of 24/12T

Edited By JasonB on 12/02/2020 13:14:47

Hi Emgee. The gears I have gone for are as stated on the plan for the Vega Twin. Is Rod giving you the size of gears for the Matador ?

Alan

Sorry posted my reply before Jason.s post

Hello again Chaps. Are the plans for the Matador still available ?

Yes, Sarik now sell them

Hi, thanks for al the information .