Member postings for donkey

Bazyle

for a magnet to hold chuck keys etc to machines I use a magnet from the kitchen department of idea they are really strong covered in plastic and best of all cost just £1.99 each I have them on every tool to hold the correct spanner or chuck keys etc. many uses.

bri

Darn it upside down.

Bri

Edited By JasonB on 03/07/2014 17:13:03

I have a real milling cutter tray but I found these ice stick trays at two for a pound at poundland (other pound shops are available. )thought you may like to know.

Brian

Edited By donkey on 03/07/2014 17:04:14

Edited By JasonB on 03/07/2014 17:12:39

Sorry my fat finger pressed the button twice.

Bri

I live in South Wales and thought we were getting a new show to visit. Doh!!

brian

personal message sent.I think I can help.

Brian

found it Tel: +44 (0)1752 313323

Email [email protected]

bri

i also fitted an nvr switch to my meddings, replacing the wiring at the same time.medding are still about today and i understand very helpful. sorry i cannot remember their phone number. my drill also does not spring return but i have never considered it a major problem however I have a back up pedestal drill.

Brian

Bob do a google search for junior hacksaw. That will find your miniature saw.

Brian

The show does not open until Friday the 13 th. you may have a long wait.

Brian

I once bought a 6 inch adjustable spanner made of chocolate for my father in a chocalate shop in France. So that my mother was not left out I bought some chocolate coffee beans. Some days later she said will you have a look at my coffee grinder it is all blocked up and those coffee beans were all soft so I threw them away. We still laugh about it now. Also the spanner was just as expensive as a bahco spanner.

BrianBrian

http://www.georgiagrindingwheel.com/grindingwheels_basics.htm#faq2

trevorth try this for colour codes.

Bri

People pointed out the adverts appearing over the text of messages making them unreadable. People said it was difficult to post photos add links and various other points. But nothing was ever done to change these things so why wouldn't they moan and complain. Rant over. I still love this forum not the site.

Brian

hall of fame

what about mr Iqbal ahmed .**LINK**

or Gerald wingrove **LINK**

bri

I am looking forward to it already. Will it start in the next issue lol.

bri

I use the magnets from ikea. They are about three inches long and only cost £1.99 each so I have one on all machines. They have a plastic cover in various colours so easy to remove any swarf. I believe they are in the kitchen department and they are very strong. Easily holds up spanners and chuck keys. But yes they do magnetise slightly so go to pound land and get yourself a demagnetiser can't remember how much they cost.

Bri

I am paying a visit on Friday. I like the event and have been going for the last few years.

Brian.

Nhs crutches are a good sliding fit but you need a third piece to complete your job. Good luck.

Brian.

I think I have added it in the album section, but this site use needs a bit of dabbling in black magic and I am no wizard.

Bri

I have a photo of my machine in green but have no idea how to upload it.sorry can send you an email if you need it.

Bri