Member postings for Maurice Taylor

Whitworth and BSF spanners are the same.AF spanners do not fit BSF , some metric ones might fit.

There is a project in Jan 2019 issue of “Everyday Practical Electronics” to build a speed controller for upto 2HP single and 3 phase induction motors ,with how it works explained.

Steel2go sell short lengths.They are at Grantham.They sell on ebay.

They have a 250 mm x3/4in dia of EN1A for £7 inc post.

Hope this helps.

Scrapyard pays £220 per tonne for hard drives , I took 15 kilo and got £3.30.These were complete with circuit boards etc.

**LINK**

I got my timber shed (20ft by30ft) from this firm 12 years ago ,still as good as new.

Firm located 20 miles north of Lincoln.

Edited By Maurice Taylor on 13/07/2018 09:14:32

Edited By Maurice Taylor on 13/07/2018 09:15:47

I've always sent meter readings and then paid the quarterly bill.Far easier than direct debit in my opinion.

I've always sent meter readings and then paid the quarterly bill.Far easier than direct debit in my opinion.

I made a stand for my ML7 based on one in MEW from Christmas 2007,it turned as a very solid stand.I fitted castors so it could be moved around easily,also fitted bolts to lift castors off the concrete floor and to level the stand.It's made from 50mm x 50mm x5mm tube, panels made from scrap computer server cabinet.

On the 160 graduated handwheel ,each division represents 0.01984375mm travel along the bed ,near enough to 0.02mm.

Hi,try www.gas-direct.co.uk This company is based between Newark and Grantham just off A1. I rent an argoshield bottle from them at a cost £6 a month

My MEW 250 now downloaded ,thank you

I can't download my copy either.When I have downloaded previous issues they are very slow to download from Pocketmags. Why can't they be pdf's.

Ford cars use 12,14,15,16 and 18mm spanners

I made a fitting for a 30 year old Qualcast petrol tank about a year ago and it was 1/8" BSP