Forum sponsored by:
Search Results
Articles 61 to 80 of 175
Don't Do This at Home - A T-slotted Slide for a Mini Lathe
Please be warned, this article involves scenes of severe cruelty to a small lathe, and set-ups that are decidedly risky. The author produced the subject of the article many years ago and has since learned how lucky he was to get away with it... Right-click and 'view image' to see bigger pictures and plans.
Free Plan: Four Jaw Chuck
This excellent design is by Bob Loader, who wrote many excellent articles on accessories for Unimat lathes for Model Engineers' Workshop. This chuck is designed to be made on the small lathe, so it has rather unconventional construction. The accompanying details are in issue 11 of Model Engineers' Workshop, June/July 1992, available in the online archive*.
The Metal Master (Impetus) Machine Tool
Once in a while someone designs something really innovative which at first sight you would think it would take the world by storm. Sadly because of entrenched viewpoints, vested interest and maybe a lack of marketing skills such good ideas do not always achieve the recognition they deserve. The Metal Master (Impetus) machine tool by David Urwick is one such innovation. It is still not clear to us why this idea did not take off. The machine is ideal for the small home machinist workshop and would avoid the somewhat larger investment in cash and the space required for multiple machines to achieve the same manufacturing capability. This is a reduced version of an article published in Model Engineers' Workshop Issue 225, February 2015, and includes a download link (below) for the most complete documentation for the Metal Master.
The 2014 Model Engineer Exhibition
The 2014 Model Engineer Exhibition in Sandown, Surrey is shaping up to be a great success with an exceptional array of outstanding models on display. Neil Wyatt reports on the first day of the exhibition (12 December 2014).
Free Plan: A Lathe Mounted Bandsaw
This intriguing design for a lathe mounted bandsaw appeared in Issues 9 and 10 of Model Engineers' Workshop (February/March 1992 and April/May 1992). Designed by Mr G Gray of Nantwich it was designed to be mounted on, and powered by, a Myford ML7 lathe, but no doubt with some modification it could be used with many other lathes of similar centre height.
Health and Safety in Engineering Workshops
The topic of 'health and safety' is not always the most popular with many hobby engineers who can view any advice on how to manage their workshops as an intrusion. Nonetheless, regular forum discussions reveal that, from time to time, there are some close calls and unpleasant accidents in our workshops. It harms no-one to make sound advice on workshop safety readily available, particularly to beginners who are in a position to learn the habits of safe working.
George Round's Home-Made Lathe
Over the years Model Engineer and Model Engineers' Workshop have featured many home-built tools, not least several lathes. In 1959 Model Engineer ran a six part series on an impressive 3 1/2" centre height lathe built by George B. Round. Subscribers Only
Using the CZ Metal Bender
The CZ Metal Bender is a small but versatile device for bending relatively narrow sheet metal parts. Its flexibility mostly arises from its ability to bend complex shapes and to produce both small radii and relatively sharp bends.
Free Plan: A Toolmakers' Hammer
Our latest free plan originally appeared in issue 8 of Model Engineers' Workshop, December 1991/January 1992. This design by Derek winks was described as 'unique' at the time, and though is is possible to purchase combined magnifier/hammers they seem to lack the elegance of this design.
.jpg)
Stepperhead Lathe Construction - Technical Notes
These technical notes have been prepared by Alan Jackson to complement his series on the Stepperhead Lathe which appears in Model Engineers’ Workshop magazine, issues 188-210, 218-219, 223-224. Subscribers Only
A Self-Feeding Facing Tool
This short article provides the essential details to allow the experienced hobby engineer to make a facing tool with automatic feed. Subscribers Only
Free Plan: A Simple Lathe
Most of us who own a lathe with a centre height of 3 inches or more at times feel we would like a smaller one for those fiddly bits. This design for such a lathe by the late Mr J.T. Bergin appeared in issue 7 of MEW with the kind permission of Mrs Bergin.
Free Plan: A Simple to Use Dividing Device
This dividing device takes an unconventional approach. Designed by Al Longworth, it appeared in MEW issue 6, August/September 1991.
Lathe Bearings
In The Model Engineer, issue 2427 of November 27 1947, E.H. Doughty, then Chief Technical Engineer of British Timken Ltd. wrote a lengthy technical letter to refute and address some of the adverse comment that had been made about roller bearings.
Norden, A Nineteenth Century Mill Engine to 1:12 Scale
In the 22 March 2013 issue of Model Engineer, Neil Wyatt introduced a series describing the construction of 'Norden', an unusual vertical steam engine based on a small sketch in an old issue of ME. The series ran from issue 4452 until issue 4472 in alternate (even numbered) issues. All the articles are available in the online archive.
Free Plan: A Clutch for the ML7 Lathe
This design by Alan Buttulph addresses the construction of a clutch for ML7 lathes. Ingeniously, by fitting the clutch to the countershaft, construction is relatively straight forward. The article, in Issue 5 of Model Engineers' Workshop that accompanies these plans is available in the archive on this website*.
Use of Magnetic Chucks for Milling and Turning
Following questions on the use of magnetic chucks for milling and turning, we have been supplied the following manuals for the use of Eclipse magnetic chucks.
WORKSHOP LIGHTING
This article by Mike Haughton in Model Engineers' Workshop 215 was well received. It's a very practical and informative survey of the options for lighting your workshop.
Free Plan: Light Duty Filing Machine
This neat little filing machine is another design from Stan Bray, the original editor of Model Engineers' Workshop. It appeared in issue 4 of MEW, April/May 1991.
Magazine Locator
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
Sign up to our Newsletter
Sign up to our newsletter and get a free digital issue.
You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy
Latest Forum Posts
- *Oct 2023: FORUM MIGRATION TIMELINE*
05/10/2023 07:57:11 - Making ER11 collet chuck
05/10/2023 07:56:24 - What did you do today? 2023
05/10/2023 07:25:01 - Orrery
05/10/2023 06:00:41 - Wera hand-tools
05/10/2023 05:47:07 - New member
05/10/2023 04:40:11 - Problems with external pot on at1 vfd
05/10/2023 00:06:32 - Drain plug
04/10/2023 23:36:17 - digi phase converter for 10 machines.....
04/10/2023 23:13:48 - Winter Storage Of Locomotives
04/10/2023 21:02:11 - More Latest Posts...
- View All Topics
Support Our Partners
Shopping Partners
Subscription Offer
Latest "For Sale" Ads
- Reeves** - Rebuilt Royal Scot by Martin Evans
by John Broughton
£300.00 - BRITANNIA 5" GAUGE James Perrier
by Jon Seabright 1
£2,500.00 - Drill Grinder - for restoration
by Nigel Graham 2
£0.00 - WARCO WM18 MILLING MACHINE
by Alex Chudley
£1,200.00 - MYFORD SUPER 7 LATHE
by Alex Chudley
£2,000.00 - More "For Sale" Ads...
Latest "Wanted" Ads
- D1-3 backplate
by Michael Horley
Price Not Specified - fixed steady for a Colchester bantam mark1 800
by George Jervis
Price Not Specified - lbsc pansy
by JACK SIDEBOTHAM
Price Not Specified - Pratt Burnerd multifit chuck key.
by Tim Riome
Price Not Specified - BANDSAW BLADE WELDER
by HUGH
Price Not Specified - More "Wanted" Ads...
Get In Touch!
Do you want to contact the Model Engineer and Model Engineers' Workshop team?
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.
Digital Back Issues
Donate
Register
Log-in
Model Engineer Magazine
- Percival Marshall
- M.E. History
- LittleLEC
- M.E. Clock
ME Workshop
- An Adcock
- & Shipley
- Horizontal
- Mill
Subscribe Now
- Great savings
- Delivered to your door
Pre-order your copy!
- Delivered to your doorstep!
- Free UK delivery!
