Singe Phase motors

I was just reading the thread about the myford lathe motor and got to thinking if i can help someone then maybe i can offer it here.

I dont know much about motors other than i do throw a few away regular, they are only single phase and they vary at 3/4 to 1 to 2 hp. I used one to create a drum sander and a local friend did the same with great success.

They are off of paint shakers when the mechanics expire.

If anyone has a need just drop me a pm and i will put down the names in order (assuming anyone wants one) and let them know in order when i have something.

charge would be for carriage which is usually about £6-7 and maybe a couple of quid for our tea fund say round off at a tenner all in.

I might be able to put more details down if there is interest

Bernie

Edited By BernieNUFC on 24/07/2017 21:16:45

Wow Bernie that's a very generous offer, personally, I don't need a motor (well not yet anyway) but appreciate the kindness of your offer and wanted to acknowledge your generosity.

Best wishes, Ian

PM sent Bernie

Thanks Ian, its nice to offer some help if i can as my tech knowledge is not good enough

PM's acknowledged

Sounds like a great idea, depends of course on the motor specs

(You'll either get 0 offers or 100 methinks)

I hope its not 100's

A bit of general info of the range, as I have one that is actually going to be used for a change

.37kw .5hp 220v 2.8a 1400 rpm

that's as good as it gets i'm afraid

Nice one Bernie

Neil