Looking for boiler plans

Hi Warren, I don't know if this is the one you are looking for **LINK**

Welcome to the forum.

Regards Nick.

Too many wheels nick and even I knew that

Maybe this one

It would be worth searching through a couple of teh online ME archives to try and track down the exact issue(s) or name of the engine.

Martin Evans in 1965, ME 3264 (Highlander Loco series)

"First, I would like to remind these readers that ME has
never, in its 66 years’ history, described in full a 7-1/4 in. gauge
locomotive, apart from the Midge, which, although an ex-
cellent little engine, was only a 0-4-0 dock shunter. I have
had many enquiries, especially from overseas readers, for a
constructional serial in 1-1/2 in. scale. etc"

Midge was way back in the 1930s( or20s??) Starts at ME1765

Edited By Ady1 on 07/10/2014 10:22:55

From an advert in 1970

7-1/4 in. gauge G.W.R. 0-4-0 Dock Tank Engine “ Midge.” Exhibition quality.

Edited By Ady1 on 07/10/2014 10:33:47

Mention of a GWR 0-4-0 Dock shunter in 3982 as an exhibit in the MEX in 7 1/4"

Opps I had looked at the one jason mentioned, but was looking for GWR and Dock Shunting, which in a Kennnion Bros catalogue from around the 90's mentions No. 1366 as being Dock Shunting.

Regards Nick.

You are possibly thinking of Midge Martin Evans did a upgrade on the boiler the modern version is

the 0-40 Dock tank by Jim Vass now Horley

If it is Midge then 3311 altered in 3318has the boiler drawing. I'll e-mail it to you later

OK who did it? Where has the original post gone? can't look the guy up to see his e-mail.

Warren if you are reading this PM me your e-mail

EDIT got your e-mail, details sent

Edited By JasonB on 07/10/2014 16:19:32

OK, OK not GWR but what about 'Tug'

Thank you all I well take a photo of it tomorrow and post it

the boiler in it now is sofet solder corcked