SillyOldDuffer | 10/06/2020 09:16:28 |
10668 forum posts 2415 photos | Posted by Paul Lousick on 09/06/2020 10:25:25:
Drain probably 10° from the bottom because it is easier and cheaper to do it this way. Paul More likely it's to stop wet muck settling in the outlet pipe and valve. If there's enough pressure in the tank when it's blown down, any water just below the valve should be pushed out provided the outlet is clear. I always think of Goldfinger leaving the aircraft... Dave |
duncan webster | 10/06/2020 17:10:23 |
5307 forum posts 83 photos | A long way down the to-do list is to fit a solenoid valve to the drain so that when you unplug the compressor it depressurises the tank and blows out any water. As I said it's a long way down the list! |
Brian Morehen | 10/06/2020 18:56:27 |
![]() 191 forum posts 11 photos | I came across this a few years ago when working on steam boilers and chemical distillation units which did require a yeary test certificate as do air compressors over 25 ltr capacity, Inspectors answer was a air tank of this size will leak and if the safety valve blows before you can do anything the air has gone . A boiler is much the same but somone could get burnt or scolded with steam , a Steam operated still is much the same if they blow inside the jacket the risk is mixed with the chemical being stilled.if the outer skin goes someone may get scalded. This is why compressors are only tested above 25 Ltr. This may have changed in the last 10 yrs .Did appear in a court case where i stated that the compressors did not have a test certicate, Answer dismiss this compressor and its value. Hope this answers your question on compressors... Regards Brian i |
jimmy b | 10/06/2020 19:09:48 |
![]() 857 forum posts 45 photos | I had the same thoughts a few years ago about my 16 year old cheapie. As has been said, it'll just leak when its knackered.
If you are worried, just replace it.
Jim |
old mart | 10/06/2020 19:12:50 |
4655 forum posts 304 photos | I may be wrong, but I have a feeling that the museums compressor might get inspected at 6 monthly intervals. The reciever could be 150L. |
Robert Atkinson 2 | 10/06/2020 19:51:28 |
![]() 1891 forum posts 37 photos | The 250 Bar/liter limit is not to do with how long it takes to empty, it's an energy limit. Less energy means less damage if it fails. Steam has no lower limit becaue of the additional heat energy and the possibility of superheated water being present which releases even more energy as it boils when the pressure is released. Google BLEVE (boling liquid expanding vapour explosion) Robert G8RPI. |
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
Sign up to our newsletter and get a free digital issue.
You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.