Member postings for Graham Titman

I have had two orders with Macc Models in the last two or three weeks and Joe has gone out of his way to send them out, his service is astounding considering what is going on at the moment.I t is all very well saying he could have sent a email but it all takes time i am a slow one diget typist this has taken nearly five minutes five or six a day takes a lot out of a working day/Graham

Thanks very John it matches up very well. I must assume the boil is continental with threads like that all the fitting are very well made for what i assume is a commercial boiler. The feed is on the other side.Thank you all for your help Graham

As the title says i have recently aquired a small Maxwell-Hemmens boiler and need to clean out the boiler feed thread and discovered it is a slightly non standard thread as above top diameter is .231 and as near as i can tell 48tpi.Thanks

Hi Geoff talk of Ogri i found this in the back of a cupboard this week a Ogri toilet roll still very shiny and slippery

Two and a half years ago we noticed my wife was having problems with her memory and after 6 months managed to get her tested at the local hospital and yes there was the start of dementia but eat healthy and get plenty of exercise and do not bother us.Eighteen months later ie about ten minutes ago i had to take to the toilet has she cannot remember where it is.We have lived in the same two bed bungalow for 28 years.She gets to the elderly medicine centre every 4/5 months and gets very little help from them.You are a burden on them and they just want you to hide away and be quiet.

+

Hi Dave W the amazon calls are not 0843 i dialed 1471 every time and it was a different area code every time including Wales,Scotland and Northern Ireland none were 0843.Graham

Hi Douglas i have had a lot of these calls about amazon prime and even with the call blocker on i phoned amazon and the operator did not seem the least bit interested.Graham

Thanks very much Windy .

Over the last two months i have had about a dozen such calls.I block them on bt 1572 and a few hours later a call on a another number.Yesterday i was that fed up with them i got a amazon call back from their customers services and they did not seem the least bit bothered.Graham

Hi it seemed long for a piston prop i/e small light aircraft the wings looked thin and i think the engines were on the wing not like the drones i found on google at the rear. It was pitch black and i was so surprised to see something so low and it was gone in a few seconds so was going reasonable fast. The thing i cannot get out of my mind is how quiet it was two hundred yards and you could not hear it at all.It was also on the same flight path we sometimes see the Red Arrows on.Sorry to be so vauge but it was in sight for less than 10 seconds.Graham

A question for the recognition experts.We was walking the dog down a very quiet gated road on tuesday evening at about quarter to six a car went past and made turn my head from the way we was walking and out of the corner of my eye saw a light in the sky about 1/4 of a mile away at about 150 feet and it was not until it got a lot closer about 200 yards could we actually hear it.It sounded like a muted tuned car engine, 2 prop engines as it was directly over head we could still hear each other talk it was so quite it was unbelievable flying roughly south east to north west and as it flew away a single orange flashing light at the rear and no lights visible on the wing tips.Flying slight south of Brixworh and heading towards Haslebech,As fae as i know we are a low flying area but only in day light.Graham

Thanks very much Phil much appreciated.Graham

Hello Phil i would like a board and components as well please.Graham

My dealer rang me up and asked if i would like a test drive in a electric car i asked him what it would be like for towing he quickly apologized for troubling me and very quickly put the phone down

Thanks Rod i will have another look on sunday if microsoft can fix a update bug that causes my computer to have the blue screen of death and go into load then work for 30 seconds then shut down. Today it has worked most off the day.Thanks Graham

Hi Dave thanks it was the old web based one that i was trying to get to work as it is the one that is used in the build in the building of the whippet. I tried to get a early version of firefox to run in a sandbox but did not work.I will just have to build the eccentric jig and hope for the best.Sorry Michael yes that is the one my habit of putting in spaces when it does not need it Thanks Graham

Edited By Graham Titman on 19/04/2019 15:58:20

Hello Neil when i press the calculate button on cam calc it comes up that the browser does not recognise the applet and a search on firefox says after version 53 it will not let java and i presume flash work.I have a old computer that runs vista and firefox will not let that connect to the internet.Graham

Is there a easy way to get Cam Calc to work with a up to date browser firefox or opera.Thanks Graham

Place on floor and jump on it a few times or flush down the toilet

We only drink black coffee and quite often when we order we get "would you like milk with them?"