Maarten Kip | 06/09/2021 07:51:25 |
19 forum posts | Hello everyone, Forgive me beforehand if the following has been answered in a earlier thread or if i am mistaken by posting in this section on the forum. I am still a newbie on this website. Has any of you experience with the Tevo VF400 Mill as advertised here: The reasons i am interested in this machine are the following: - In the advertisement it is said it is extremely quiet wichj is important for me because i live in an appartement with tennants all around me. - It is not so heavy, and i will do only small work. - I like the simple way it is constructed. I know it has its limitations but for me thats no issue. An alternative for me would be the Wabeco 1200 Kind regards, Maarten |
Speedy Builder5 | 06/09/2021 08:17:39 |
2878 forum posts 248 photos | My only comment about the Tevo machine is the round column. If you need to change the head height, you may loose registration on the x-y axes. |
Ady1 | 06/09/2021 08:23:58 |
![]() 6137 forum posts 893 photos | I would look at videos to get a decent feel for the racket they make You will also need to do sound reduction stuff, like rubber feet, some vibrations can go through an entire building Can you hear neighbours washing machines? |
ega | 06/09/2021 11:05:36 |
2805 forum posts 219 photos | For the benefit of possible future searchers: is there a typo in the heading and, if so, could it be corrected (Teco is a brand of VFD). PS Just looked at the link and it seems the typo is in the post - my mistake! Edited By ega on 06/09/2021 11:07:57 |
ega | 06/09/2021 11:09:45 |
2805 forum posts 219 photos | Posted by Speedy Builder5 on 06/09/2021 08:17:39:
My only comment about the Tevo machine is the round column. If you need to change the head height, you may loose registration on the x-y axes. There seems to be a key at the rear of the column. |
Maarten Kip | 07/09/2021 08:16:42 |
19 forum posts | Posted by ega on 06/09/2021 11:05:36:
For the benefit of possible future searchers: is there a typo in the heading and, if so, could it be corrected (Teco is a brand of VFD). PS Just looked at the link and it seems the typo is in the post - my mistake! Edited By ega on 06/09/2021 11:07:57
Yes, i'm sorry. Mistake is on me. Thanks for the input!
|
Maarten Kip | 07/09/2021 08:18:41 |
19 forum posts | Posted by Ady1 on 06/09/2021 08:23:58:
I would look at videos to get a decent feel for the racket they make You will also need to do sound reduction stuff, like rubber feet, some vibrations can go through an entire building Can you hear neighbours washing machines? My small workshop has fibration reduction matting. I allready have a lathe and so far so good there are no complaints altough i have done quit a bit of lathe work.
|
Maarten Kip | 07/09/2021 08:20:59 |
19 forum posts | Posted by ega on 06/09/2021 11:09:45:
Posted by Speedy Builder5 on 06/09/2021 08:17:39:
My only comment about the Tevo machine is the round column. If you need to change the head height, you may loose registration on the x-y axes. There seems to be a key at the rear of the column. Looking closely at the pictures of the backside of the machine i am not really sure. Could be a key but could also be the acme thread for the Z axis.
|
mgnbuk | 07/09/2021 08:35:57 |
1394 forum posts 103 photos | That looks rather like a modern incarnation of the old East Germany manufactured Hobbymat milling machine. The head & column assembly could be fitted to a bracket mounted behind the Hobbymat lathe bed, or mounted in a separate X-Y table assembly to produce the stand-alone milling machine. Much along the lines of the Emco FB2 milling machine, but smaller. IIRC the original DDR machine was a 1MT spindle, but I could be mistaken. Nigel B. |
smf | 07/09/2021 08:53:27 |
38 forum posts 36 photos | Hi - Nigel, you beat me to it. I think this is the updated version of the Hobbymat BFE65/Saupe BFW300, but with belt drive rather than by gears. If so, then it does have a key at the rear to help maintain vertical alignment. I don't know how noisy the belt drive is, but my BFW300 is a little noisy (c.80dB at 1 metre). Shouldn't the belt drive be quieter? I like my BFW300 - it won't take big cuts and isn't as rigid as a larger machine, but it's a decent little machine. |
Maarten Kip | 07/09/2021 12:09:32 |
19 forum posts | Posted by mgnbuk on 07/09/2021 08:35:57:
That looks rather like a modern incarnation of the old East Germany manufactured Hobbymat milling machine. The head & column assembly could be fitted to a bracket mounted behind the Hobbymat lathe bed, or mounted in a separate X-Y table assembly to produce the stand-alone milling machine. Much along the lines of the Emco FB2 milling machine, but smaller. IIRC the original DDR machine was a 1MT spindle, but I could be mistaken. Nigel B.
By the looks of it i had already deduced it was based on the Hobbymat/Saupe Mill. Those had 1MT spindles. The Teco has a 2MT spindle.
|
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
Sign up to our newsletter and get a free digital issue.
You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.