Pride of Penrhyn Steam Wagon drawing and construction notes

Hi,

I've recently bought a part built Winsons/Modelworks 2" Scale Pride of Penrhyn Steam Wagon. I don't suppose any knows where I might source the drawings and construction notes?

I've tried Engineers Emporium and Steam Traction World but they are unable to throw any light on a source.

I'm sure there must be someone out there who has or knows of someone who might be kind enough to photocopy. I will obviously reimburse for any costs.

Do they steam well when complete?

Many thanks,

Mark

Mark,

I realise your post is over six years old now but I do have a full set of build drawings and instructions should you still require them.

Chris

Hi Chris I do have a POP just wondering if I could have a copy of the drawings and instructions. I have lost mine over the years.

Many thanks

Edited By aaron Bassett on 29/05/2021 14:14:54

Hi Chris

Do you anybody else have any plans for this steam wagon

Thanks

Neil

Neil - I have the drawings and assembly instructions that were supplied with the Winsons Pride of Penrhyn kit, Is it those you require?

Aaron - Apologies but I have only just seen your request dated 29/05/2021. Do you still require these?

Hi Chris

Could you help me out with some information

Could you look at the drawings and see what the part number is for the bracket that is the gear operating hande and I think it is the output shaft bearing its on the left hand side near the gear assembly

Thanks

Neil

I’m not at home for a week or so but will check this for you when I’m back

Chris

Hi Chris

Fine on you being away

I dont need that part number Ive found the part amongst the photographs of parts

I know you have offerd the drawings to Aaron if he doesnt need them we can work things out

Ive bought the POP from Station Road Steam So Ive just got to wait for delivery and see what Im missing I know the engine and cad sides are missing and the rood=f

Catch up when you get back

Neil

Ules0

Hi Neil, Julia Old did a extensive build of one of these engines, doing necessary mods to make the engine work. She is on traction talk forum.The series was published on her web site years ago, not sure if I still have it but I will look. She has gradually moved up in scale to little Samson 6 inch scale engine. So is well qualified. I think this engine is based on the Robey steam wagon.The boilers were good, commercially made, but some of the engineering needs work.This wagon was better than some of the locos, I have the tiger tank.! Made by them which is basic compared to armourtek now.

I think she stiffened the road springs as we lack of ground clearance with driver on it.

Regards

Vic

Hello Vic

Thanks for the information

Im stuck o another problem now

I need the dimensions of the gears

On e of mine has gone missing Im not sure if Ive lost it or somebody took a liking to it

Im not going to mention where it was but most of my friends are disgusted.

Ive got 3 to work of but I need dimensions so I can figure ot which one is missing then I can get a new one made

Thanks again

Neil

Hello there - l am a new member to the forum - with my grandson we have just made a move into a slightly larger live steam model - we have a Winson kit built PoP steam wagon but we have no paperwork - l would appreciate any assistance and advice available plus access to a set of instructions and drawings to the original build. Thankyou

Hi

Everyone im looking for a set of drawings for the winson penrhyn and if there ever was any a set of operating instructions.

Many thanks in advance

Steve

David Wager - Hello Steve l have not had any luck so far in my search for instructions or drawings but l believe there is a published book out there written by an engineer who stripped down and successfully rebuilt one of the Pryde of Penryn models.

If anyone knows of this publication or has one l would be very pleased to hear from them through the forum.

Cheers and heres hoping.

David.

David and Steve, sorry but only just seen your posts. I have all the original supplied drawings and instructions - and a not yet completed kit!

Let me know what you’d like and I’ll scan to a pdf file if that’s ok for you

Chris

Hello Chris many thanks for your reply - l purchased a completed but unused PoP earlier this year but l have nothing in the way of paperwork so l would really appreciate any and everything you have as a pdf.

Many thanks again.

David.

Hi

Chris

That's Amazing I would really appreciate a copy of the instructions and any paperwork relating to the vehicle.

Its been hard work trying to deal with issues not having any reference this would be a major help in getting my PoP up and running ready to show next year.

Massive Thank you

Steve

Good morning Steve - sounds as though you and l am in a similar situation. Perhaps we can use this connection to keep in touch, as l said in my first post, buying the PoP is a big step up from the many Mamod and Wilescos that l have been collecting for my grandson Toby. We are very keen to get things moving and hopefully attend some local shows next summer.

Cheers David.

If you both let me have your emails iI'll send all info to you

Chris

Morning Chris - Many thanks indeed - my email is a bit long winded

[email protected]

Cheers David.