An unusual tool
Joseph Noci 1 | 20/02/2019 09:54:34 |
1323 forum posts 1431 photos | Would there not be a chance of swarf, minute or otherwise, penetrating the collet/jaw contact area when the jaws are released to remove the work piece? After all, the swarf flies everywhere inside the cabinet and in the video, the tiny brass shavings might enter the chuck area. Unlike a normal collet holder that is essentially sealed except for the slots at the workface. I still like the idea though. I also especially like the cnc machine.. Joe |
JasonB | 20/02/2019 10:01:20 |
![]() 25215 forum posts 3105 photos 1 articles | He says he uses through coolant collets so slots are sealed |
jimmy b | 20/02/2019 10:45:30 |
![]() 857 forum posts 45 photos | I just used to hold an ER collet chuck in some soft jaws. I really can't see an advantage to how this is shown.
JIm |
Chris Trice | 20/02/2019 10:45:51 |
![]() 1376 forum posts 10 photos | Given the high degree of accuracy with which the chuck jaws are obviously machined, I can imagine that the part of the jaws that fits in the collet groove also contact the bottom of the collet groove and participate in the closing action as well as preventing the collet being squeezed out the chuck.. |
Chris Trice | 20/02/2019 10:51:21 |
![]() 1376 forum posts 10 photos | Posted by jimmy b on 20/02/2019 10:45:30:
I just used to hold an ER collet chuck in some soft jaws. I really can't see an advantage to how this is shown.
JIm I don't think it's an attempt to improve accuracy but more about being able to change sizes quickly and positional consistency. However, I suspect it's probably very accurate also since the soft jaws by their nature hold very accurate tolerance when holding at the position they were machined at. |
JasonB | 20/02/2019 11:19:28 |
![]() 25215 forum posts 3105 photos 1 articles | Once again if you read the link you will see in this instance he has 250 of those brass tubes to machine and the setup allows the material autofeed to be used rather than having to stand by the machine to undo and tighten an ER Collet 250 times Edited By JasonB on 20/02/2019 11:20:11 |
Neil Lickfold | 21/02/2019 06:02:20 |
1025 forum posts 204 photos | It is a easy way to have an auto collet closer using the 3 jaw chuck. Neil |
Joseph Noci 1 | 21/02/2019 06:26:27 |
1323 forum posts 1431 photos | Posted by JasonB on 20/02/2019 10:01:20:
He says he uses through coolant collets so slots are sealed I am not sure I understand what you mean by 'sealed' Your photo below shows normal slit collets - where is the sealed slots? My query was re swarf entering the three jaw to collet contact area,ie the collet taper surface. The 3 jaws have space between them where swarf could enter and when the 3jaw retracts to decompress the collet, swarf can enter the gap, enter the collet slit, or the collet to soft-jaw contact area, upsetting TIR surely..?
Joe |
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
Sign up to our newsletter and get a free digital issue.
You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.