Member postings for Ian Parkin

Hold a die grinder in the toolpost and with the jaws opened and locked in position with a fixture take a gentle pass off the inside of the jaws (whilst lathe is stationery)

this may only hold true for thgis diameter depends on the quality of your chuck/scroll gears etc

Edited By Ian Parkin on 02/03/2018 14:03:41

I have just ordered some for my stock £1.25 for 50 delivered !!

Yes neil it comes from that

I try to play but better with banjo

Ian

well i'll be blowed i.ve never seen those before on any item of equipment i've repaired

thanks

Yes i did say they were links

what are they called and why in a resistor type package

I've never seen these used before what are they?

the components in beige with a centrally positioned black line mainly unmarked on the board

they are links but why in the resistor type package?

Innes

The ideal size is 16mm to 19mm they will fit your toolholder best with less shimming required

Well the feelers arrived 40 kg in all packed

SteveI has had half of the total lot

I still have far too much for my needs

So if anyone wants some I have 4 lots of 9 thou 17 thou 22 thou and 4 boxes of 23 thou i'll do these at £10 posted to the uk or all 4 lots for £22

this is 12" long by 1/2" wide 10 to a box

70 strips in all

Edited By Ian Parkin on 14/02/2018 12:34:31

Not my typo

I had a letter today from MEW saying the payment details have changed

To £3.75 every 3 months

Has anyone else had this?

I generally wait till 3 seconds very rarely lose because of hardware/connection problems

I have a use for quite a bit of it but if anyone wants some i’ll Do half or quarter of teh whole lot for 1/2 or 1/4 the cost to me

What makes you think that the auction in question was won like that

Probably some sad old bloke sat in front of the telly on sat night won it...now he’s wondering what on earth he’s going to do with all those feeler fingers

I was tempted too and I,m sure it wasn't won by a professional using bidding software

Ian

Edited By Ian Parkin on 04/02/2018 07:50:02

Joseph. i did plough through all the Hoffman catalogue but couldn’t find the inserts just the tool holders

Hmm at those prices i’ll Have to put my tool holders up for sale

Can anyone provide a link to where i can get a komet fg1 insert from in 60 and 55 degree or an idea of price?

You need to plough through the instruction manual /set up guide and change the control from local to remote

My newest clock finished now with new face