By continuing to use this site, you agree to our use of cookies. Find out more

Member postings for here again

Here is a list of all the postings here again has made in our forums. Click on a thread name to jump to the thread.

<< First < Prev 1 2 3 4 Next > Last >>
Thread: Flat belts
08/07/2016 18:37:21
Stationary Engine magazine do a booklet on flat belts..Very interesting although not sure how much you need it now!
Thread: sieg sc3 mini lathe precision ?
28/06/2016 16:16:31
Stewart Hart s travelling steady had a couple of pages in ME or MEW last year..I made some something similar for the same job..I bought a Chester small fixed steady too as its the only one I found with enough metal on the fingers to drill holes in and add rollers
Thread: J-B Weld not setting
25/06/2016 21:03:50
I used jbweld once and it set but didnt stick well..I wondered as its heat resistant if it needed heating ! Best I ve used is a very dark black/brown and yellow one which I forget the name of!
Thread: Model engineering not so expensive a hobby!
19/06/2016 09:53:17
When I started buying I said I d equal big purchases on holidays..Still succesfully hidden milling machine thiugh
Thread: Wells To Walsingham Light Rail.
17/06/2016 08:41:04
I agree..Also North Norfolk rlwy at Sheringham.
Mid Norfolk at Dereham and Bure Valley .Wells..
Last one is operated by the Scottish owner with a sense of humour and a special way with whistles in the short tunnel!
Thread: Stuart Wheel and Stop Valves
06/06/2016 14:00:17
I think Macc Models does them and overseas ..
Thread: Which slitting saw
18/05/2016 20:18:49
Thats niceEmgee..
i hadnt realised 72 tpi would do it..I ve got one! Thank you Jonathon
17/05/2016 21:06:15
I ve just come across the same thing Andrew except I m making deep cuts/cutting off in cast iron and gunmetal..Having spent a long time looking up tpi for a 4" blade .Coarse starts at 6 it seems..A bit too coarse?
Jonathon
Thread: Drummond M Headstock and Bed
07/05/2016 14:59:44
Thank you Bazyle..yahoo wint accept either of me email addresses ,as expected..I can read parts of it though.very nice Hopper..I ll have a go...
07/05/2016 09:24:23
I ve always had problems with yahoo and cant access the drummond group properly..I ve been searching the net for a fixed steady but havent found anything which would fit or near fit, does anyone happen to know please..Jonathon
06/05/2016 17:39:30
Oops..no idea why that happened!I hope to have my 1910 pre b type up and running soon too..Its in very good condition except haedstock bearing which has quite a loud click..I have an old very mucky headstock which seems to have new bearings..Hopefully I can slide the new ones in without moving the headstock..Fat chance!!
06/05/2016 17:08:14
As long as its the same.iso100 in the same scale would be far too sticky..
Jonathon
06/05/2016 16:14:22
I have some iso100 from machine mart which is sae30 hydraulic oil..He said he had never heard of iso32..!
06/05/2016 16:14:21
I have some iso100 from machine mart which is sae30 hydraulic oil..He said he had never heard of iso32..!
06/05/2016 16:14:20
I have some iso100 from machine mart which is sae30 hydraulic oil..He said he had never heard of iso32..!
Thread: 16BA screws
02/05/2016 07:33:22
Modern screws ltd..thescrewshop.co.uk
Thread: electric - measuring the kwh for my workshop
29/04/2016 10:17:25
I cant see any corrolatiom between them either! We cant rely on wofi as its BT .Apparantly their routers are nt very good..They even came once and put 200 feet of tree proof cable up especially for us..It made no difference..gadgets gadgets everywhere but not an on/off switch among them..
29/04/2016 08:01:36
Interesting that Neil
I have a 12 v solar panel on the roof of my boat which powers all I need,mind you satelite televisions can be used but not by me!Also a 1 kw inverter..The farmer who owns the site keeps checking my shoreline meter as I have only used ?7 worth of electricity in 17 months..I ll do the same in our new bungalow when I get time..Multi fuel stove ,back boiler 1 radiator and a 12 v pump to feed it..I expect the gas provider will want to know why we are nt using enough gas..
26/04/2016 12:17:43
I think meaduring kwh in my workshop has been solved ..
As far as the British Gas smart thing us concerned we have not yet found a way of altering it in any way..
I thinnk if a thermostat is set too allow hot water to pass at 25c it generally will..We can understand that..We cannot understand how smart things work,not being too smart ourselves..Those who like to play with gadgets can have them all,please have them all!
25/04/2016 22:53:44
The old meter coming via ebay Martin said refurbished..Hope so!.
<< First < Prev 1 2 3 4 Next > Last >>
Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Sign up to our Newsletter

Sign up to our newsletter and get a free digital issue.

You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy

Latest Forum Posts
Support Our Partners
cowells
Sarik
MERIDIENNE EXHIBITIONS LTD
Shopping Partners
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest

 

Donate

donate