Member postings for celso ari schlichting

how i made my little bender:

https://youtu.be/WrhdF_if-J4
greetings from Brazil

Celso Ari

my shop made knife vise:
https://youtu.be/C6Cv2Sd8iPE

Greetins from Brazil
Celso Ari

1/2 20tpi

I made this adaptation:

**LINK**

greetings from Brazil

Celso Ari

how i made my slip roll:

https://youtu.be/TMmBxPGpGt4

greetings from Brazil

Edited By celso ari schlichting on 05/10/2018 22:09:16

Edited By celso ari schlichting on 05/10/2018 22:13:14

thanks friend

Celso Ari

thanks, are belt sander pulleys.

(my english is not good here we speak portuguese)

greetings from Brazil

[youtube]https://youtu.be/H6H1gx5M21M[/youtube]

Thanks friend.

I do not know how to tell you the degree of hardness of the anvil, but it was hard enough not to scratch or sink. Nor was it too hard to break.
Sorry, my english is not very good.
Greetings from Brazil

here it is not much different Neil

greetings from Brazil

Celso Ari

how i built my homemade anvil:

greetings from Brazil

Celso Ari

Edited By Neil Wyatt on 25/09/2018 21:10:56

Part 6 (the ball crank):

https://youtu.be/wGXcGib1jGA

Thanks Brother. I enjoyd you liked... greetings from Brazil

Celso Ari

part 5:

https://youtu.be/rezImGUZZ3E

Thanks John. I did little drawing, and in a very rudimentary way, just to cut the pieces

greetings from Brazil

Celso Ari

Edited By celso ari schlichting on 15/02/2018 21:29:32

part 4:

Part 3:

https://www.youtube.com/watch?v=_RJzI80pxOM

obrigado Michel (thanks Michel)