Drawing for making a 1" inch die stock
John Baron | 17/03/2021 17:59:26 |
![]() 520 forum posts 194 photos |
Hi Guys, I managed to strip the thread in my cheap Chinese die stock recently, so I decided to make a new one. I did a drawing to give me something to follow with my new DRO on the mill. I've placed a copy here. The bits in blue are just in case somebody would like to make one with the corners milled off. The 7 mm holes are for threading M8 for handles to screw into. My existing handles are threaded M8.
|
Clive Brown 1 | 17/03/2021 18:51:07 |
1050 forum posts 56 photos | I think I'd make the 1" dimension a tad oversize, say by 5 or 10 thou, to give the die room for growth. |
Nicholas Farr | 17/03/2021 20:25:01 |
![]() 3988 forum posts 1799 photos | Hi, well my commercially made one piece 1" die stock which was my father's, is 1.003" at best and that's always been ok when needed to open a die a little to start a new thread. Regards Nick. |
John Baron | 20/03/2021 15:12:12 |
![]() 520 forum posts 194 photos | Hi Guys, Thanks for your posts ! Nobody pointed out that I had forgotten to do the drawing of the fastening/adjusting screw holes and positions Edited By John Baron on 20/03/2021 15:14:05 Edited By John Baron on 20/03/2021 15:14:32 Edited By John Baron on 20/03/2021 15:14:48 |
larry phelan 1 | 20/03/2021 15:21:15 |
1346 forum posts 15 photos | Never thought there was anything special about making a stocks. Made mine 60 years ago and still going strong. |
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
Sign up to our newsletter and get a free digital issue.
You can unsubscribe at anytime. View our privacy policy at www.mortons.co.uk/privacy
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.