Member postings for Brett Hurt

She is so cute

I got one off ebay and it worked very well and cheap.

Look at this https://www.youtube.com/watch?v=xmv58Z3RZ9c&feature=youtu.be that is what I do

this is it https://www.businessinsider.com/world-economic-forum-world-biggest-problems-concerning-millennials-2016-8 I go with this page it is right on

I like this a lot https://www.youtube.com/watch?v=wpiaYwuPAs0 then a nice glass of wine and it has been a good day in the shop

this guy is great https://www.youtube.com/watch?v=IR2p9ceg1bw

Edited By JasonB on 08/07/2018 07:01:09

unless if they are dyslexia that iam at 65 years. And it sucks when you have to ask some one how to spell. And this guy has ot /www.pinterest.com/pin/61361613651553042/?lp=true

I do need to make a racket wkeel and goes on 1898 edison gem phonograph that is why it is 1.oo od. The ones I see on ebay and other places are worn out, thay is why I need to make it. I do have a indexing head that I use may be once ever 6 years. But the info you guys have give me has help.

Bazyle i have a A dividing head and I need to do this in steel.

how do I build one, the one i need has 14 div. with id of 1.000. i know this is not like a gear like this **LINK**

So how is it done and what cutter I have never made one of these

Had a glass of win with my love and read me 1977.

thanks for the info

I work on old phonograps those old things you crank up. And on working on this one I broke a part and need too know if I can silver solder it back. And what do I need for this, I have never silver soldered?.

Thanks for the info Brett

I got a grizzly lathe http://www.grizzly.com/products/13-x-40-Gunsmithing-Lathe-with-DRO/G0776, so why is dial .002 per line on the carriage, as I dial in or out. And how do I fix it to read .001 per line. I know it is in the lead screw. But iam not that smart about these stuff.Just need some info on it. Brett

I need to make a rivet tool how is it done the rivet head is about 1/4 in. thanks

Iam cleaning the shop up and getting all the chips up off the floor then I have to rewire the mill switch ps it is a little clod to day sc usa a low of 9 f and a hi of 32f but I have a heater

In workshop series book 35 page 85 how does this all go together, like the lower slide. How does the lead screw work in it I need picturess of it.. Iam building the one on page 76 and need to know it all works. thanks

What do I have to do to modafie it to a bolder 8in grinder, Iam going to build one and would like it fit my grinder, and need to know any problems with the build.

I need to know if they work to leval a lathe or mill, it well go on a enco 13x40 lathe and a G3617 Horizontal / Vertical Mill Brett