Tormach PathPilot Version 2

For those who have recently upgraded to the newly released PathPilot Version 2 and in the process lost connectivity to the shared network folder, I have posted a fix on my website. Care is also needed if you install the new Dropbox sharing feature. I have also posted same to NYC CNC forum for those subscribing.

www.altrish.co.uk

I all ways get a little excited when I find another Tormach user in the UK that's 7 now.

As yet I still have not been able to get my machine to file share on PP 2.0 so Iv dropped back to my old set up to keep me moving while Tormach work it out for me. Have you seen any other bugs in the system yet as there has been quite a few show up on the Slant Pro but nothing has been said about the mills just yet.

Good evening Stumpy and thanks for your message. Tormach gave me three references in the UK before I bought and I am in regular communication with one of these.

I no longer post on the forum but deemed this information worthy of breaking silence to those interested. With hindsight I should have put a link to the post on my website to make life easier. If you follow this link you will get my full write up which is on the opening page, second entry down.

The fix worked for me straightaway and has been good ever since. The other good thing is that once you are connected you get live updates automatically downloaded to the machine. I think this problem dropped off the end of the shift register in doing the upgrade checking and there will be a 2.0.1 issued shortly.

It is important to watch Dropbox loading if you enable this.

There is quite a lot of other Tormach/Fusion 360 and 3D printing on the site which might take your fancy. This includes an illuminator light for the Tormach spindle using an ebay Angel Light.

Hope that helps.

Kind regards

Alan