Member postings for Steambuff

I look forward to seeing it

Neil, Andy .... wot about a construction article for ME (With drawings etc)

I would like a 3 1/2 electric, so I can run while I am building my steamer (and waiting for the boiler)

Dave

M-Machines sell Tufnol Strip & Sheet in various sizes. (They should cut it down to the size you want if you ask)

Dave (No connection, just a happy customer)

John,

Think it depends which browser you are using, I am using [Win 7 Pro - 64 Bit, IE 9 64 Bit] with compatability mode switched OFF and it displayed OK for me.

Dave

Looks OK to me. [Win 7 Pro - 64 Bit, IE 9 64 Bit]

(Dave must have fixed it)

Dave

I have always used either - Teroson Etch Primer Aerosol for Metal & Plastics. (C+L Finescale supply it) or the Phoenix Paints etch primer.

I always use the latter if I am going to use a Phonix top coat.

Dave

MichaelG' s example is fine on my PC ... Win 7 64 bit with IE 9.

Weird ... looks like a browser dependent issue again.

Dave

Nigel,

Nope not here ... Win 7 64 Bit and IE 9

Is it all threads or just 1 or 2 ... If just 1 or 2 then let DC1 (David Clark 1) know and he will get it fixed.

Dave

Windoze updates has not wiped out my "Remember me" information.

Deleting the Cookies in IE will though!

Dave

I see the same as John except I see a "Remember Me" tick box.

John seems to be missing the box headers as well (i.e Shopping PArtners)

Diane - I do see a photo of Ben Pavior  to the right of the Login box ... I get the Model Engineer banner across the top, the login box is in the top right under the banner, then the Shopping Partners is under that..

I am Win 7 64 bit and IE 9

Dave

Edited By Steambuff on 13/07/2012 00:31:12

David,

No .. my password is not a rude word, but it is one I use on quite a few sites!!!

(Not my banking ones etc)

Dave

Does that mean that you can see or access our passwords?

Dave

Hi David

Are you signing on from 2 PC's ... when you login on the second PC, it will log you out of the first .... Just a thought.

Dave

I stay logged in all the time ... Magpie/Derek is correct ... you have to accept the Cookie Statement.

(If you reject it or ignore it, you will have to log in everytime.)

Dave

I would go for the one with the bigger table and fixed column.

My Mill has a tilting column, but I have never used it , I tilt the work or use a tilting vice if needed. (I just don't want the hassle of resetting the column to ensure it is flat everytime.)

Dave

In my view there is no reason why you can't use Copper for the saddle tank ...

The only things ?I can think of against it are :-

a/ The cost

b/ Copper is a lot softer than brass (or steel) so will mark and dent a lot easier.

Dave

All OK here ... Windows 7 (64 bit) and IE 9 --- looks like a browser problem

Dave

All OK here on Windows 7 (64 Bit) and IE 9

Dave

Hiya,

Downloaded the E** Index ... All works fine now Thanks

Dave

I am running Windows 7 Pro (64 bit) and all 3 start OK for me and do the searches OK, returning data.

The only problem I have seen is in the EIM one, if you enter Lilla into the Keyword, you get a error message. (Other Keywords seem to work OK ... a corrupt record perhaps)

Dave