Member postings for martin cross 1

Hi, buy a Zeus Data Charts and Reference Tables book around £3-7.00 amazon have loads. Got all you need in it.

Thanks for all the replies, in terms of what do I build etc; I started on a Stuart 10v many years ago simply because it fitted on the ML10.

I didn't know an awful lot then (not much better now), but it taught me that taking your time and reading up on stuff then I could do a decent job. I didn't have a mill so did all that on the lathe, which was time consuming but it all actually went quite well.

Now that we have youtube I can and do follow a few of the best on there which I find quite inspiring, I intend to build a clock at some point especially after watching Chris on Clickspring (that guy is a genius). I have the book and the plans, now semi retried maybe things can start to happen?

I have the ML10, now the Centec which is in great condition so anything is possible. Anyone wants to meet for a cuppa then let me know, I need to see what goes on in other mancaves for ideas.

Hi all, recently moved into the fens and bought a place with a nice big man cave so I can finally set up all my stuff properly.

My ML10 has a place front and center with lots of natural light, just bought a Centec 2A which I shall be stripping and cleaning. Anyone with advice on this mill would be well received. Will post a pic over the next few days, has a suds switch and large tray as well as lots of cutters, so am quite happy.