Member postings for Phil Grant

Two PCBs/Kits left to go but I need an address from Nigel Taylor 2 and confirmation/payment/address from LesT

I've tried PMs but so far no answer, please PM me ASAP

Phil

Neophyte,

Yes, I've had the same problem but this came pretty quick.

Sometimes they have stuff sent from China, keep it in stock and then put a UK postage label on it to send out but if they have non left they don't tell you but just wait for it to come from China.

Very frustrating!

I don't think so, you can configure the pulse count in the software configuration file.

I bought one of these, UK delivery.

Search for this on Ebay

600P/R Photoelectric Incremental Rotary Encoder 5V-24V AB 2-Phases Shaft 6mm UK

Edited By Phil Grant on 28/11/2019 16:02:47

Edited By Phil Grant on 28/11/2019 16:03:32

Hi,

I have the alias "Neophyte" down on my list for a PCB, do you already have one, I may have you down twice, once under your real name. I have sent a PM to Neophyte but it's been unread for a while.

Phil

I found the cheapest option was fro TI themselves, it came from Germany but the postage was cheaper than Mouser or Digikey.

Hi,

I still have a few people who asked for a PCB and are on the list for the last batch but haven't responded to the PM I've sent, maybe because they didn't tick the box to receive notifications of PMs?

If you've requested a PCB and I said you were on the list for the third batch but haven't heard from me then please check your inbox.

Cheers,

Phil

Great, good luck putting it together, any problems with missing parts etc. let me know.

Phil

Good News!

Thanks for letting me know.

Best Regards,

Phil

There are now nineteen PCBs out there for the ELS project, not counting the ones that Clough42 sold! are there any finished or partially completed builds yet?

Is it worth setting up a thread to show peoples implementations? I can start with how far I've got, I'm not finished by a long chalk but I'm happy to post pictures and share the designs I've done for mounting the bits to a mini Warco hobby lathe.

What do you think?

Phil

Glad they arrived OK.

Little Top hats to sit on the buttons are a good idea, the natural spring back of the switch will be enough, I don't think you'll need any springs or foam.

Phil

?? What was the post?

Glad to hear it, I was worried about them getting damaged in the post.

Hi,

I have some Component packs ready to post out, my plan is to post them out to those who've already got a PCB in the first batch.

I've got a bit stuck with a couple of contact details where I've got a name that I didn't link to a username and they're different so if you have a PCB and you asked for a kit of components and I've not already PM'ed you then please PM me with you details so I can align the name with the userid

Phil

Dennis,

I've added you to the list

Phil

James,

Added to the list, third batch ordered.

Phil

Added you to the list.

Graham,

Currently the next batch of PCBs have all been claimed, If I get enough interest I will order a 3rd batch and you would be on the list for one of these.

I'll let you know what happens.

Phil

Good Morning Dias,

I take it that your PCB arrived OK?

I just realised that as I bought some of the components for my PCB with a min order quantity I have a few spares.

Would anyone be interested in buying a kit of parts? Either on their own or with a PCB if you've already waiting for the next batch to arrive.

If anyone's interested I'll list what the kit will contain etc. on here.

Phil