Member postings for Neil Wyatt

Useful to know.

I use PLA+ for most things now.

Neil

I have been trying to help Mason with this.

It seems his subs details are correct according to the database, but the archive is failing to validate them.

If subscriptions can't sort this tomorrow, I'll ask the IT team to investigate.

Neil

I asked it to choose between two options:

"Both the Myford Super 7 and the SC4 lathe are high-quality machines that are suitable for advanced hobbyists and professionals. The decision on which one to choose ultimately comes down to your individual needs and preferences.

I asked it 'Is the Kugelpanzer' a hoax, and it wrote a well argued case that it is a hoax, but offered some evidence on both sides.

I asked Bard, and it was adamant that the Kugelpanzer is real.

(It's a good question as there is a 'Kugelpanzer' in a Russian tank museum, but it's authenticity and provenance are disputed, so a nuanced subject).

N.

Of course! Excuse my brain f*rt!

N.

If the wheel has two pitches, it can't slip to lock in with both of them, it either goes sideways or produces a bastard knurl.

Neil

I was tempted to say he took all the air out, then carefully let some vacuum in

Neil

That's the problem with mini lathes ... different factories, different detail; specs

Consider a sleeve as suggested above. A temporary wrap of insulation tape may last long enough to make one.

Neil

I rotated your pics Richard.

The main downside is keeping things clean, bearing in mind that any spilled resin will slowly cure. Also, you need the propanol 'loads' with resin, but you can use the curer to make it precipitate out (not completely) and then get rid of the goo at the bottom (which will set and become inert if left outside). In short, you benefit from becoming a bit more methodical, but a doddle for anyone who used to do 'real' photography!

Neil.

I will be doing this over coming months, not an article in every issue though!

The tough resin is ... tough!

Neil

My review of the Creality Halot One 3D Sterolithography (SLA/ Resin) Printer

Halot One Review

In short, I've been having (and continue to have) a lot of fun. Have been using tougher, slightly flexible resin since the review. It's much less brittle (actually has some give) but is fussier about part orientation and support.

Neil

There are more photos in the magazine article (Moidel Engineers' Workshop issue 327). For avoidance of doubt the links to the Creality shop are not affiliate links, they are just for your convenience and tell them that you came from the article (but they do have a big sale on!)

Edited By Neil Wyatt on 06/04/2023 18:14:44

You need water AND oxygen for rust (hence the survival of objects in anaerobic marine mud).

Virtually every Victorian and early 20th century screw or nail I have seen in a door, joist or floorboard has some degree of rust regardless of the timber.

Neil

I think that nicely justifies the change in itself!

Neil

WE have several beta-test volunteers (nothing happening yet though).

I'm sure a few more would be useful, but I don't know if everyone offering will be asked to take part.

Thanks

Neil

My dad's letter came on Saturday or Monday.

Surname starting with W, so maybe it's alphabetical!

Neil

A 1994 inverter is probably getting ready to let the magic smoke out of its electrolytic capacitors, although running it up for half and or more every 6-12 months.extends life.

Neil

Available at considerable discount on Amazon... from the makers.

Worth starting this thread just for the humorous replies and anecdotes!

For clarity here's the thing I was looking at. For the price, I am tempted. I know one of my brothers would love one as a birthday present - he has a steampunk streak.

Neil

🤣🤣🤣